Minicom Advanced Systems 3000 manual Upgrading firmware, Service window

Page 38

DS VISION 3000

Figure 42 Service window

Upgrading firmware

Upgrade firmware to improve functionality and fix bugs. Firmware updates can be found on the Minicom website www.minicom.com in the Support section under Product Upgrades. For specific upgrade information on the DS Vision 3000 system see explanations and release notes of each firmware version.

1.Save the firmware update on your hard drive and unzip it to a temporary folder.

2.Verify the system topology by clicking on the Detect button in the Topology tab and note the number of levels and units connected to the system.

3.Go to the Service window and check the current Firmware and FPGA versions of all units by clicking the Query button and selecting Firmware or FPGA, see Figure 43. The version appears in the Version line, see Figure 44.

Click here for F/W version

Click here for

FPGA version

Figure 43 Query button

37

Image 38
Contents DS Vision User Guide Table of Contents User Guide Trademarks Technical precautionsWelcome User guide feedbackFeatures IntroductionTransmitter / Broadcaster System componentsSystem overview Receivers Broadcaster Unit 8 portReceiver side Receiver DCL Mounting the ReceiversLine Splitters Vesa standard screw holesLEDs LEDTuning Unit DS Vision applicationsLong cluster Pre-installation guidelines Twisted Pair wiring installation tipsDS Vision cables Broadcaster/Transmitter cablesConnecting the cables Broadcaster/Transmitter connectionsReceiver /Receiver L connections Receiver DCL connectionsConnecting/cascading a Line Splitter/L Connecting CATx cablesConnecting the Broadcaster/Transmitter Connecting to the power supplyAdjusting the picture quality TablesDS Vision system management Saving and exitingInstalling the Service utility Connecting the Serial Download cableCom port LanguageTopology Auto-detectCallouts Auto-detected topologyManual UpdateCheck Saving a Group Naming a portSaving a topology Deleting a Group Saving a GroupFrom the topology on the left hand side Selecting the ports to commandControlling the system Selecting all Sending commandsFrom the icons on the right hand side Control of Receiver DCL monitorsSending/blocking video Sending/blocking a Serial commandSending/blocking a bi-directional Serial command Sending/blocking AudioTo tune from the Transmitter/Broadcaster position To tune from the Receiver L/DCL or Line Splitter/L positionTest card Tuning window from Line Splitter L position Red, Green, BlueRemote Tuning RGB signalsRemote tuning Select device web Service Gives an overview of the remote tuningService window Upgrading firmwareVersion line Broadcaster’s Local Serial port ServiceDisplay Data Channel DDC hotkey Security Security windowTechnical specifications DDCDimensions Regional Offices
Related manuals
Manual 33 pages 40.44 Kb