USER GUIDE
Check
When units have been connected or disconnected since last detecting the topology you can check for any changes to the topology.
To do so:
1.Click 
. Any new units detected appear as connected but undefined 
. You must still define the unit.
2.To manually define the units connected to the ports, click the checkbox of a port or a number of ports that have the same device connected.
3.Click 
. A
4.Select the device type. Note! When the device is a Line Splitter, repeat the process of defining the connected devices for each port of the Line Splitter.
Note! Check does not update the topology, it detects any new connections and units that are disconnected appear with a yellow exclamation mark 
.
Update
To add new devices to the present topology click 
. The new devices appear. Units that are disconnected appear with a yellow exclamation mark 
.
Manual
You can display the topology manually whether the system is online or offline. To display the topology manually:
1.Click 
. A
2.Select the connected Transmitter/Broadcaster. The selected topology appears on the left, see Figure 29. If the Service Utility is online you can see which ports have devices connected. In Figure 29 a device is connected to port 6.
24