Minicom Advanced Systems 3000 manual Installing the Service utility

Page 21

USER GUIDE

11.Installing the Service utility

The Service utility is located on the supplied CD and on our website www.minicom.com in the Support section.

Install the Service utility on a computer with the following system requirements:

Intel® Pentium® II or equivalent processor

Windows XP Professional, Home Edition, or Tablet PC Edition with Service Pack 2; Microsoft® Windows® 2000 with Service Pack 4; Windows 2003 Server; or Windows Vista™

128MB of RAM

10MB of available hard-disk space

For full functionality of the Service utility the DS Vision system (Broadcaster/Transmitter, Line Splitters and Receivers) must be connected and switched on. You can however configure the system topology manually even when the system is not operational.

Connecting the Serial Download cable

Connect the Serial Download cable to the Control port of the Transmitter/Broadcaster and a Serial port of the computer which has the Service Utility installed.

 

 

 

 

 

 

 

 

 

 

 

AUDIO OUT

5VDC

 

 

 

 

 

 

 

 

VIDEO OUT

LOCAL

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

1

2

3

4

5

6

7

8

VIDEO IN

SERIAL

AUDIO IN

To computer’s

Serial port

Serial Download cable

Figure 23 Connecting the Serial Download cable

To open the Service Utility, choose Start/Programs/DS Vision 3000 Service Utility/ DS Vision 3000 Service Utility. The Control window appears, see Figure 24.

20

Image 21
Contents DS Vision User Guide Table of Contents User Guide Welcome Technical precautionsTrademarks User guide feedbackIntroduction FeaturesSystem components System overviewTransmitter / Broadcaster Broadcaster Unit 8 port ReceiversReceiver side Mounting the Receivers Receiver DCLVesa standard screw holes Line SplittersLED LEDsDS Vision applications Tuning UnitLong cluster Twisted Pair wiring installation tips Pre-installation guidelinesBroadcaster/Transmitter cables DS Vision cablesBroadcaster/Transmitter connections Connecting the cablesReceiver DCL connections Receiver /Receiver L connectionsConnecting the Broadcaster/Transmitter Connecting CATx cablesConnecting/cascading a Line Splitter/L Connecting to the power supplyTables Adjusting the picture qualitySaving and exiting DS Vision system managementConnecting the Serial Download cable Installing the Service utilityLanguage Com portAuto-detect TopologyAuto-detected topology CalloutsUpdate CheckManual Naming a port Saving a topologySaving a Group Saving a Group Deleting a GroupSelecting the ports to command Controlling the systemFrom the topology on the left hand side From the icons on the right hand side Sending commandsSelecting all Control of Receiver DCL monitorsSending/blocking a bi-directional Serial command Sending/blocking a Serial commandSending/blocking video Sending/blocking AudioTo tune from the Receiver L/DCL or Line Splitter/L position To tune from the Transmitter/Broadcaster positionTest card Red, Green, Blue Tuning window from Line Splitter L positionRGB signals Remote TuningRemote tuning Select device web Gives an overview of the remote tuning ServiceUpgrading firmware Service windowVersion line Service Display Data Channel DDC hotkeyBroadcaster’s Local Serial port Security window SecurityDDC Technical specificationsDimensions Regional Offices
Related manuals
Manual 33 pages 40.44 Kb