DS VISION 3000
Choose the preset distance closest to the actual distance in meters between the Player and remote screen. This will give you a fairly accurate tuning, which can be further finely tuned using the other functions of the Tuning Unit.
To tune an image: 1.Scroll to Tables
2.Use the arrow keys to browse through all the predefined tables.
3.When you reach the desired table, press the Menu key. MNU=SAVE appears in the LCD and the table downloads. During downloading the LCD message blinks.
4.If the tuning is not at all satisfactory, select and download a different table. 5.Once the adjustment is satisfactory, press the Menu key to scroll to next function.
Note! For the Receiver DCL both the connected screens receive the same tuning adjustments.
Saving and exiting
To save all settings in the Receiver L/DCL or Line Splitter unit: 1.Scroll to Save / ESC
2.Press the up arrow to save all changes and exit or press the down arrow to disregard all changes and exit.
10.DS Vision system management
The DS Vision system comes with a Service utility to configure and control the system. Use the Service utility to:
∙Define up to 16 Groups of monitors – (a specific monitor may belong to several Groups).
∙Broadcast/disconnect video and/or audio and/or serial data to each monitor or to Groups of monitors.
∙View system topology and switching status of each monitor.
∙Remotely tune a monitor.
∙Upgrade each system component firmware or FPGA
∙Configure DDC settings (read, save and store in Transmitter)
∙Return to the factory default settings
19