Minicom Advanced Systems 3000 manual Remote tuning

Page 35

USER GUIDE

 

 

http://192.168.111.132

 

LAN

Remote tuner at the

 

 

screen

DS Vision Service

Broadcaster

 

 

Receivers

Utility installed here

 

Line Splitter

Player - IP: 192.168.111.132

Figure 38 Remote tuning

At the player the setup is done as follows:

1.Connect the Serial Download cable to the Broadcaster/Transmitter and player.

2.Open the Service Utility and choose Tools/Options, the Preferences window appears, see Figure 25 above.

3.Select the Enable Remote Control checkbox, the software starts a small web server in the background allowing other computers on the network to access it. The Check Remote Control button un-grays. Click the button to display a local browser to indicate that the remote option is enabled and functioning.

4.To verify the IP address of the player, click Start/Run, type “cmd” press Enter, type “ipconfig” press Enter. The IP address appears.

The tuning at the remote laptop/device is done as follows:

1.Open a browser and type the IP address of the player. For example in Figure 38 the remote tuner accesses the tuning facility by typing the IP address http://192.168.111.132.

2.Press Enter. A list of all Receivers L, Receivers DCL and Line Splitters connected to the player appears, see Figure 39.

34

Image 35
Contents DS Vision User Guide Table of Contents User Guide User guide feedback Technical precautionsWelcome TrademarksIntroduction FeaturesTransmitter / Broadcaster System componentsSystem overview Broadcaster Unit 8 port ReceiversReceiver side Mounting the Receivers Receiver DCLVesa standard screw holes Line SplittersLED LEDsDS Vision applications Tuning UnitLong cluster Twisted Pair wiring installation tips Pre-installation guidelinesBroadcaster/Transmitter cables DS Vision cablesBroadcaster/Transmitter connections Connecting the cablesReceiver DCL connections Receiver /Receiver L connectionsConnecting to the power supply Connecting CATx cablesConnecting the Broadcaster/Transmitter Connecting/cascading a Line Splitter/LTables Adjusting the picture qualitySaving and exiting DS Vision system managementConnecting the Serial Download cable Installing the Service utilityLanguage Com portAuto-detect TopologyAuto-detected topology CalloutsManual UpdateCheck Saving a Group Naming a portSaving a topology Saving a Group Deleting a GroupFrom the topology on the left hand side Selecting the ports to commandControlling the system Control of Receiver DCL monitors Sending commandsFrom the icons on the right hand side Selecting allSending/blocking Audio Sending/blocking a Serial commandSending/blocking a bi-directional Serial command Sending/blocking videoTo tune from the Receiver L/DCL or Line Splitter/L position To tune from the Transmitter/Broadcaster positionTest card Red, Green, Blue Tuning window from Line Splitter L positionRGB signals Remote TuningRemote tuning Select device web Gives an overview of the remote tuning ServiceUpgrading firmware Service windowVersion line Broadcaster’s Local Serial port ServiceDisplay Data Channel DDC hotkey Security window SecurityDDC Technical specificationsDimensions Regional Offices
Related manuals
Manual 33 pages 40.44 Kb