USER GUIDE
6.Select another device to tune by clicking Select another device or close the webpage.
Figure 41 gives an overview of the remote tuning.
The DS Vision 3000 Service Utility is running in “Remote” mode on the player (or on another computer) connected to the Broadcaster. This computer is attached to LAN and already has an IP Address.
(for example 192.168.111.132)
IP: 192.168.111.132 |
The “Remote control”
mode turns on the built-
in web service in the
control utility
Digital Signage |
| Digitalii ii llSignageii |
| ||
|
|
|
Http://192.168.111.132
Figure 41 Remote tuning setup
16.Service
You can do the following from the Service window:
∙Upgrade firmware
∙Configure DDC settings
∙Return to the factory default settings
∙Configure the Broadcaster’s Serial port
Click the Service tab, the service window appears, see Figure 42.
36