CONTENTS
Setup menus
USER menu | <OPERATION> | |
|
|
|
No./Item |
| Description |
|
| |
|
| |
100 | This selects the direct search dial operation. | |
SEARCH ENA | 0000 | DIAL : |
| For direct search dial operations. | |
| 0001 | KEY : |
| Operation is not transferred to the search | |
| mode unless the search button is pressed. | |
|
| |
101 | This sets the maximum speed for shuttle | |
| operations. | |
SHTL MAX |
|
|
| 0000 | a8.4 : 8.4a normal speed |
| 0001 | a16 : 16a normal speed |
| 0002 | a32 : 32a normal speed |
|
| |
102 | This sets the maximum speed for FF and | |
| REW operations. | |
FF. REW MAX |
|
|
| 0000 | a16 : 16 (32)a normal speed |
| 0001 | a32 : 32 (60)a normal speed |
| 0002 | a50 : 50 (100)a normal speed |
| <Notes> | |
| OThe speeds given in the parentheses apply in | |
| the DVCPRO (25 Mbps), DV and DVCAM | |
| mode. | |
| OWith the DV/DVCAM format, the maximum | |
| speed is set to 32a regardless of this item’s | |
| settings. | |
|
| |
104 | This selects whether to warn the operator | |
| when the REF. VIDEO signal has not been | |
REF ALARM | connected. | |
| 0000 | OFF : Warning is not given. |
| 0001 | ON : Warning is given by the flashing |
|
| STOP lamp. |
| <Note> | |
| Video and audio output may be disturbed when | |
| the reference video signal is not input, so it is | |
| recommended that a system which inputs the | |
| reference video signal be used. | |
|
|
|
No./Item |
| Description |
|
| |
|
| |
105 | This selects the VTR mode in which the EE | |
| status is established when the MODE switch | |
AUTO EE SEL | is set to EE. | |
| 0000 | S/F/R : EE status is established in |
| STOP, FF, REW and EJECT modes. | |
| 0001 | STOP : EE status is established in STOP |
| and EJECT modes. | |
| 0002 | BLACK : EE status is established in STOP |
| and EJECT modes. | |
| However, if the MODE switch is set to TAPE, | |
| the picture becomes black and the sound is | |
| muted when the tape is ejected. | |
| 0003 | BLACK1 : EE status is established in |
| STOP, FF, REW and EJECT modes. | |
| However, if the MODE switch is set to TAPE, | |
| the picture becomes black and the sound is | |
| muted when the tape is ejected. | |
| 0004 | GRAY : EE status is established in STOP |
| and EJECT modes. | |
| However, if the MODE switch is set to TAPE, | |
| the picture becomes gray and the sound is | |
| muted when the tape is ejected. | |
| 0005 | GRAY1 : EE status is established in |
| STOP, FF, REW and EJECT modes. | |
| However, if the MODE switch is set to TAPE, | |
| the picture becomes gray and the sound is | |
| muted when the tape is ejected. | |
|
| |
106 | This selects the EE mode output signals. | |
EE MODE SEL | 0000 NORMAL : | |
| Signals are output with a delay equivalent to | |
| the length of internal signal processing. | |
| 0001 | THRU : |
| Signals are output directly, without internal | |
| processing, and so are output with no delay. | |
| <Note> | |
| When the unit is in edit mode and SDTI/1394 or | |
| SG has been selected for the input signals by the | |
| INPUT SELECT button, internal operations are | |
| forcibly set to NORMAL. | |
|
| |
107 | This set the play delay time in frame | |
| increments. | |
PLAY DELAY |
|
|
| 0000 | 0 |
| : | : |
| 0015 | 15 |
|
| |
108 | This selects the CAPSTAN LOCK mode. | |
CAP. LOCK | 0000 | 2F : 2F mode |
| 0001 | 4F : 4F mode |
| 0002 | 8F : 8F mode |
|
| |
109 | This selects whether to rewind the tape | |
| automatically to the tape start when the tape | |
AUTO REW | end is detected. | |
| 0000 | OFF : The tape stops at the tape end. |
| 0001 | ON : The tape is rewound to the tape |
|
| start. |
|
|
|
The underlined items indicates the initial setting.
37 (E)