Panasonic VQT9958 Int Sg, OUT Vsync, Mute SEL, Freeze SEL, OUT C Kill, Edh, YC SEP Mode, ESR Mode

CONTENTS

Setup menus

USER menu		<VIDEO>
No./Item		Description
600	This selects the internal reference signal.
INT SG	0001	BB :
	The black burst is generated.
	0002	CB100 :
	100% colour bars are generated.
	0003	CB75 :
	75% colour bars are generated.
601	This selects whether to float the vertical sync
	position of the video output in order to align
OUT VSYNC	the video output phase with the input in the
	EE/record/edit modes.
	0000	N-VF :Signals are not floated.
	0001	VF : Signals are floated.
602	This selects whether to mute the video output
	signals when a blank on the tape has been
V-MUTE SEL	detected during playback.
	0000	N-MUTE :No muting. (Freeze)
	0001	LOW RF : Muting. (Set to gray.)
605	This selects the freeze mode for still pictures.
FREEZE SEL	0000	FIELD : Field freeze.
	0001	FRAME : Frame freeze.
	<Note>
	When frame freeze has been selected, the frame
	slow status is established with the slow setting.
606	This selects chroma colour killer processing
	for the video output signals.
OUT C KILL
	0000	B/W : No colour signals are output.
	0001	COLOR : Colour signals are output.
609	This selects whether to superimpose EDH
	onto the serial output signals.
EDH
	0000	OFF : EDH is not superimposed.
	0001	ON : EDH is superimposed.
	<Note>
	Even when ON is selected for this setting, EDH is
	not superimposed onto the signals output from
	the SDI OUT 3 connector if the SUPER switch on
	the front panel of the unit is set to ON.
611	This selects Y/C separation processing for
	the composite input signals.
YC SEP MODE
	0000	B/W :
	The signals are processed as B/W signals.
	0001	AUTO :
	The signals are automatically detected.
	<Note>
	When no optional board (AJ-YA932G) has been
	installed, setup menu No. 611 is not displayed.

No./Item		Description
618	This selects the interpolation operation.
	Vertical interpolation is conducted automatically
INTERPOLATE	during slow-motion playback to reduce the
	vertical movement of the playback pictures.
	However, this menu item enables the
	interpolation operation to be forcibly turned off.
	0000	OFF :
	Interpolation is forcibly turned off.
	0001	AUTO :
	Interpolation is automatically turned on during
	slow-motion playback.
620	This selects the operation mode for edge
	subcarrier reduction (ESR) in the playback
ESR MODE	circuit.
	0000	OFF :
	The mode is forcibly set to OFF.
	0001	AUTO :
	The mode is automatically set to ON or OFF
	depending on the VTR operation.

The underlined items indicates the initial setting.

46 (E)