Panasonic VQT9958 operating instructions Edit

CONTENTS

Setup menus

USER menu			<EDIT>
No./Item			Description
301		This selects the operation to be performed
	SD955
		when an edit point has been set incorrectly
IN/OUT DEL		(when the OUT point is before the IN point).
		0000	MANU :
		Editing is not executed unless the illegal edit
		point is cleared or set again properly.
		0001	AUTO :
		The edit points already input are automatically
		cleared.
303		This selects STD or NON-STD in accordance
		with the composite input signal.
STD/
NON-STD		0000	AUTO :
		Standard/non-standard		signals	are
		automatically identified and processed.
		0001	STD :
		Standard signals are processed. (Forced STD)
		0002	N-STD :
		Non-standard signals are processed. (Forced
		NON-STD)
		<Note>
		Use the non-standard (N-STD) setting when
		video or audio trouble occurs with signals from
		laser discs or a satellite.
304		This selects the video signal processing.
SERVO REF		0000	AUTO :
		Servo is synchronized with the input signal
		during recording and editing, or with the REF
		signal during playback.
		0001	EXT :
		Servo is synchronized at all times with the REF
		signal.
305		This sets the channel assignments for the
		controller’s analogue audio preset when
EDIT RPLCE1		editing the digital audio of the VTR using a
		controller which does not have a digital audio
		edit preset control function.
		This selects the channel concerned when the
		VTR CH1 edit preset is set in compliance with
		the ON or OFF presetting for the analogue
		audio signals designated by the controller.
		0000	N-DEF :
		Not set.
		0001	CH1 :
		Compliance with analogue CH1 edit preset.
		0002	CH2 :
		Compliance with analogue CH2 edit preset.
		0003	CH1+2 :
		Compliance with either analogue CH1 or CH2
		edit preset.

No./Item		Description
306	The same type of setting as setup menu No.
	305. This selects the channel concerned when
EDIT RPLCE2	the CH2 edit preset is set in compliance with
	the ON or OFF presetting for the analogue
	audio signals designated by the controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analogue CH1 edit preset.
	0002	CH2 :
	Compliance with analogue CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analogue CH1 or CH2
	edit preset.
307	The same type of setting as setup menu No.
	305. This selects the channel concerned when
EDIT RPLCE3	the CH3 edit preset is set in compliance with
	the ON or OFF presetting for the analogue
	audio signals designated by the controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analogue CH1 edit preset.
	0002	CH2 :
	Compliance with analogue CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analogue CH1 or CH2
	edit preset.
308	The same type of setting as setup menu No.
	305. This selects the channel concerned when
EDIT RPLCE4	the CH4 edit preset is set in compliance with
	the ON or OFF presetting for the analogue
	audio signals designated by the controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analogue CH1 edit preset.
	0002	CH2 :
	Compliance with analogue CH2 edit preset.
	0003	CH1+2 :
	Compliance with analogue CH1 or CH2 edit
	preset.

The underlined items indicates the initial setting.

41 (E)