Panasonic VQT9958 operating instructions User menu Audio

CONTENTS

Setup menus

USER menu <AUDIO>

No./Item		Description
734	This selects whether the operation of the
	MONITOR SELECT button on the front panel
MONI SEL INH	is to be enabled or disabled.
	0000	OFF : Operation is enabled.
	0001	ON : Operation is disabled.
	0002	ON1 :
	Operation is disabled in the FULL display
	mode and enabled only in the FINE display
	mode.
735	Although CUE is automatically output to the
	monitor output in accordance with the
MON AUTO	operation mode when a setting AUTO has
SEL	been selected by setup menu item No. 721
	(MONI CH SEL), the MON AUTO SEL setup
	menu item is used to select the monitor
	channel which is to be automatically switched
	to CUE.
	0000	L/R :
	CUE is output to both the left and right
	channels.
	0001	L :
	CUE is output to the left channel only.
	0002	R :
	CUE is output to the right channel only.

The underlined items indicates the initial setting.

<Concerning the CUE output in the search mode>

No./Item		Description
738	This selects the function of the audio level
	control knobs on the front panel.
AUDIO VR
SEL	0000	REC : This adjusts the recording level.
	0001	PB : This adjusts the playback level.
	<Note>
	It is not possible to set it so that both the
	recording level and playback level can be
	adjusted.
	When REC is selected, UNITY (fixed level) is set
	for the playback level; when PB is selected,
	UNITY is set for the recording level.
750	This selects the audio output level during DV
	playback.
DV PB ATT
	0000	OFF : The audio output level is not
		attenuated.
	0001	ON : The audio output level is
		attenuated (reduced).
751	This selects whether to mute the sound where
	recordings are joined during DV/DVCAM
REC PT MUTE	playback.
	0000	OFF : The sound is not muted.
	0001	ON : The sound is muted.

The table below shows how the CUE output to the monitor and main signal system outputs differs according to how the setup menu item (No. 721, No. 731 and No. 735) settings are combined.

731	721	735	Monitor output			Main signal system output
CUE OUT	MONI CH	MON AUTO
SEL	SEL	SEL	Lch	Rch	CH1	CH2	CH3	CH4
	MANU	----------	PCM 21	PCM 21
		L/R	CUE	CUE
OFF	AUTO	L	CUE	PCM 21	PCM 21	PCM 21	PCM 21	PCM 21
		R	PCM 21	CUE
	PCM	----------	PCM 22	PCM 22
	MANU	----------	PCM 21	PCM 21	PCM 21	PCM 21	PCM 21	PCM 21
		L/R	CUE	CUE	CUE	CUE	CUE	CUE
ON	AUTO	L	CUE	PCM 21	CUE	PCM 21	CUE	PCM 21
		R	PCM 21	CUE	PCM 21	CUE	PCM 21	CUE
	PCM	----------	PCM 22	PCM 22	PCM 22	PCM22	PCM22	PCM 22
					(L ch) 23	(R ch) 24	(L ch) 23	(R ch) 24

<Notes>

21: PCM audio signal output is muted when the VTR is played outside the –0.43 to +1 normal speed.

22: PCM audio signal output is muted when the VTR is played outside the –10 to +10 normal speed.

When either AUTO is selected, the PCM audio signal is output within –0.43 to +1 normal speed even in the automatic CUE output mode.

23: The channel selected with the MONITOR SELECT L button on the front panel is output.

24: The channel selected with the MONITOR SELECT R button on the front panel is output.

49 (E)