Panasonic VQT9958 operating instructions Blank

CONTENTS

Setup menus

USER menu		<V BLANK>
No./Item			Description
800	For selecting the mode for recording signals
	on additional lines.
ADD LINE 25
	0000	OFF : No		signals	are	recorded	on
			additional lines.
	0001	YC422 : The		422	mode	signals	are
			recorded on 1 line.
	0002	YC411 : The		411	mode	signals	are
			recorded on 1 line.
	0003	Y1_B/W : Only the Y signal is recorded on
			1 line directly.
	0004	Y1_BPF : Only the Y signal is recorded on
			1 line after it has been separated
			from the C signal.
	0005	C1	: Only the C signal is recorded on
			1 line.
	0006	Y2_B/W : Only the Y signal is recorded on
			2 lines directly.
	0007	Y2_BPF : Only the Y signal is recorded on
			2 lines after it has been
			separated from the C signal.
	0008	C2	: Only the C signal is recorded on
			2 lines.
	<Notes>
	OWhen a setting from “0001 (YC422)” to “0008
	(C2)” is selected and the STOP button is
	pressed, operation transfers to the sub-screen,
	and the recording line or lines can be selected.
	To return from the sub-screen, press the STOP
	button again.
	OThe setting takes effect when the system
	format is 25 Mbps.
Sub-screen
00	For selecting the additional line where the
REC LINE1	signals are to be recorded.
	0000	7L
	:	:
	0015	22L
	0016	320L
	:	:
	0031	335L
	0032	623L
01	For selecting the additional line where the
REC LINE2	signals are to be recorded.
	0000	7L	<Note>
	:	: This menu item is not displayed
	0015	22L	when additional			line mode
	0016	320L	setting “1” through “5” has been
	:	:	selected.
	0018	322L
	:	:
	0031	335L
	0032	623L

The underlined items indicates the initial setting.

No./Item			Description
801	For selecting the mode for recording signals
	on additional lines.
ADD LINE 50
	0000	OFF : No signals			are	recorded	on
			additional lines.
	0001	YC422 : The		422	mode	signals	are
			recorded on 2 lines.
	0002	Y4_B/W : Only the Y signal is recorded on
			4 lines directly.
	0003	Y4_BPF : Only the Y signal is recorded on
			4 lines after it has been
			separated from the C signal.
	0004	C4	: Only the C signal is recorded on
			4 lines.
	<Notes>
	OWhen a setting from “0001 (YC422)” to “0004
	(C4)” is selected and the STOP button is
	pressed, operation transfers to the sub-screen,
	and the recording lines can be selected.
	To return from the sub-screen, press the STOP
	button again.
	OThe setting takes effect when the system
	format is 50 Mbps.
Sub-screen
00	For selecting the additional line where the
REC LINE1	signals are to be recorded.
	0000	7L	:		:
	:	:	0031	335L
	0015	22L	0032	623L
	0016	320L
01	For selecting the additional line where the
REC LINE2	signals are to be recorded.
	0000	7L	0018	322L
	:	:	:		:
	0015	22L	0031	335L
	0016	320L	0032	623L
	:	:
02	For selecting the additional line where the
REC LINE3	signals are to be recorded.
	0000	7L	:		:
	:	:	0031	335L
	0003	10L	0032	623L
	:	:	<Note>
	0015	22L	This menu item is not displayed
	0016	320L	when setting “1” has been
			selected as the additional line
			mode.
03	For selecting the additional line where the
REC LINE4	signals are to be recorded.
	0000	7L	:		:
	:	:	0031	335L
	0015	22L	0032	623L
	0016	320L	<Note>
	:	:	This menu item is not displayed
	0019	323L	when setting “1” has been
			selected as the additional line
			mode.

50 (E)