Marantz MV5100 Press the Play 8 or Stop 9 button to select on, If on Screen Mode is set to on or

MV5100 04-26 7/21/00 10:58 AM Page 26

26 On-Screen Status Displays

An on-screen status display will appear when you press the OK/STATUS button or certain function buttons.The contents of the status display will vary; the status display describes the current operations of the VCR.

ON SCREEN MODE ON:

•Whenever you press the PLAY 8 button or the STOP 9 but- ton, some of the contents of the status display will appear for five seconds.

ON SCREEN MODE COUNTER:

•The real-time counter will appear on the screen during normal tape playback and when playback is stopped.Whenever you press the PLAY 8 button or the STOP 9 button, some of the contents of the status display will appear for five seconds. After five seconds, only the counter will remain on the screen.

ON SCREEN MODE OFF:

•No status display will appear when you press function buttons or the OK/STATUS button.

To select a status display mode, follow these steps.

1

Press the VCR button, then press the MENU button.

➔VCR SET UP TUNER SET UP INITIAL SET UP TAPE MANAGER

Sound program available

Current VCR operation

REW					12:00 PM	Time
STEREO					CH. 12	Channel
SAP			SHARP
	B−−−−−+−5−−+−−−−+−−−−−E
REMAINING
TIME			0:59
SLP		0:00:00 HIFI
				Sound program
Tape speed
				selected

Real-time counter

Tape time remaining

SmartPicture setting

Current tape position

(B is the beginning of the tape; E is the end of the tape.A flashing square indicates the current place you are at on the tape during fast forwarding or rewinding.)

SELECT: 89	CONFIRM: OK
END: MENU

2

Press the PLAY 8 or STOP 9 button to select VCR SET

UP, then press the OK/STATUS button.

➔ DSPC		ON
ON SCREEN MODE		ON
BLUE BACKGROUND		ON
TIMER REC SPEED		MANUAL
VIDEO STABILIZER		OFF
AUDIO OUT		HIFI
NEXT PAGE
SELECT: 89	CHANGE: '
END: MENU

3

Press the PLAY 8 or STOP 9 button to select ON

SCREEN MODE.

4

Press the FF - button repeatedly so that ON,

COUNTER, or OFF appears beside ON SCREEN MODE.

5

Press the MENU button.

Helpful Hints

•If ON SCREEN MODE is set to ON or

COUNTER:

•You may bring up the status display at any time by pressing the OK/STA- TUS button. (The exception is during Slow, Search, or Still mode.) The dis- play will appear for about five sec- onds.

•Channel numbers (if memorized by the VCR) will appear for a few sec- onds.

•When tape playback is stopped, press the OK/STATUS button repeatedly to see the current time, real-time counter, remaining tape time or current TV chan- nel number on the display panel. During tape playback, press the OK/STATUS button repeatedly to see the current time, real-time counter or remaining tape time on the display panel.The cur- rent TV channel will not appear.

•Depending on the type of tape used, the remaining tape time may not appear right away, or may not be cor- rect. Also,“– – : – –” may appear, or the display may flash if the VCR is still calculating the remaining tape time.