Marantz MV5100 manual Putting Batteries in the Remote Control, Using the Remote Control

MV5100 04-26 7/21/00 10:58 AM Page 5

Putting Batteries in the Remote Control

1

To remove the battery compartment lid, push in the tab, then pull up the lid.

2

Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated.

3

Replace the battery compartment lid.

Using the Remote Control

•Do not put objects between the remote control and the VCR.

•Point the remote control at the device you are operating.

•Press the VCR button before pressing other VCR buttons; press the TV button before pressing other TV buttons; press the SAT/CBL/DBS button before pressing other Cable Box/DBS but- tons. Details are on pages 24-25 and 27-28.

Erase Protection

Video cassettes have record tabs to ensure that recordings are not erased accidentally.

1

To prevent accidental erasure, break off the tab with a screwdriver.

2

To record again, cover the hole with cellophane tape.

VCR Maintenance/Video Head Cleaning

•Remove any light adhesive stick-on notes from the video cassette before putting the cassette in the VCR. Removable labels can jam the VCR.

•Periodic maintenance is required to maintain your VCR’s perfor- mance.Your VCR automatically cleans the video heads each time you insert a tape. However, the heads may become dirty.“USE CLEANING CASSETTE” may appear on the screen, or “U:01” may appear on the VCR display panel. Details are on page 79.

Before Using Your VCR 5

1

2

3

1

2

Helpful Hints

•The remote control and its batteries are supplied.

•Do not mix alkaline and manganese batteries.

•Do not mix old and new batteries.

•A thin, plastic cover may protect the front panel of your VCR. Before using the VCR, lift a corner of the plastic, then peel it off.