Marantz MV5100 manual Recording, Press the VCR button, Appear on the display panel

MV5100 27-84 7/21/00 10:59 AM Page 30

30 Recording

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever chan- nel the CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (details are on page 5) in the VCR.The power will come on.

3

Press the VCR button.

4

If the VCR light appears on the display panel of the VCR, go to step

5.If the VCR light does not appear, press the VCR/TV but- ton once.

5

Press the ALT/SPEED button until the desired tape speed appears on the screen. The VCR will only record in SP or SLP. Details about tape speed are on pages 41 and 77.

6

Use the CH(annel) 8/9 button or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button to start recording. The \ light will appear on the VCR display panel. If no tape is in the VCR, NO CASSETTE will appear on the screen briefly.

8

To pause the recording (for example, during commer- cials), press the STILL/SLOW button. The \ M M light will

appear on the display panel.

To resume recording, press the STILL/SLOW	button
again. The \ light will appear on the display panel.

9

Press the STOP 9 button to stop recording.The \ light will disappear from the display panel.

10

Press the STOP/ EJECT button on the front panel to remove the tape. The tape number will be assigned and appears on the screen. Write the tape number on a label and affix the label to the tape for the Tape Manager. Details are on page 64-73.

1 Turn on the TV.

2 Insert a tape.

	SAT/							3
	CBL/DBS			TV			VCR
4	VCR/TV		POWER		SMARTPICTURE
		QUICK PROGRAMMING
	1– +*		+ 2 ABC + 3 DEF
	START		STOP			DATE		6
	4 GHI - 5 JKL - 6 MNO
	VPS/PDC		DAILY			WEEKLY
5	7PQRS		8 TUV			9WXYZ
	SPEED		DBS/SAT
	ALT		0			CLEAR
	-		STILL/SLOW				+
		..........			..........
8	REW						FF
			PLAY
			STOP
9	VOL		OK/STATUS				CH
			MENU
			TIMER
	TURBO	AUDIO/		SKIP			TAPE
	TIMER	MUTE		SEARCH MANAGER				7
	JOG/SHTL						REC /OTR
	REV						FWD

Helpful Hints

•If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, PROTECT-

ED CASSETTE CANNOT RECORD will appear on the screen briefly.The VCR will eject the tape.

•The VCR records in a preset volume.

•If the end of the tape is reached while recording, the VCR will stop recording, rewind the tape, then stop. Details are on page 76.

•While “- - - -” is blinking on the VCR display panel after insert a tape, the tape will run for a few seconds to search for the tape number. Details are on page 64.

•DSPC may appear briefly on the dis- play panel when you start a record- ing. Details are on page 60.