Marantz MV5100 manual Quick Programming cont’d

MV5100 27-84 7/21/00 10:59 AM Page 42

42 Quick Programming (cont’d)

7

Press the Number 3/DATE+ or Number 6/DATE– button to set the recording date. Every time you press a button, the date changes in one-day increments. If you press and hold a but- ton, the date changes quickly.The day of the week will appear automatically. (You cannot program the VCR to record more than one year in advance.)

ONE TIME PROGRAM
PROGRAM	1
CHANNEL +/– 12		CABLE/TV
START +/–	08:00	PM
STOP +/–	10:00	PM
REC SPEED	SLP
DATE +/–	06/21/00
	WEDNESDAY
DAILY: 8		WEEKLY: 9
CONFIRM: OK		END: TIMER

8

•If you want to record the program one time only, go to step 9. You may also press the Number 8/DAILY or Number 9/WEEKLY button repeatedly to select a ONE TIME PROGRAM.

•If you want to record the program daily, press the Number 8/DAILY button so that DAILY PROGRAM appears at the top of the screen. The VCR will record a program every day from Monday through Friday, starting at the same time and recording for the same length of time.

•If you want to record the program every week, press the Number 9/WEEKLY button so that WEEKLY PRO- GRAM appears at the top of the screen. The VCR will record a program on the same day at the same time and for the same length of time every week.

DAILY PROGRAM (MON-FRI)

PROGRAM	1
CHANNEL +/– 12		CABLE/TV
START +/–	08:00	PM
STOP +/–	10:00	PM
REC SPEED	SLP
DATE +/–	06/21/00
	WEDNESDAY
DAILY: 8		WEEKLY: 9
CONFIRM: OK		END: TIMER

SAT/
CBL/DBS		TV	VCR
VCR/TV		POWER	SMARTPICTURE
	QUICK PROGRAMMING				7
1– +*		+ 2 ABC + 3 DEF
START		STOP	DATE
4 GHI - 5 JKL - 6 MNO
VPS/PDC		DAILY	WEEKLY
7PQRS		8 TUV	9WXYZ		8
SPEED		DBS/SAT
ALT		0	CLEAR
-		STILL/SLOW		+
	..........		..........
REW				FF
		PLAY

STOP

VOL OK/STATUS CH

MENU

TIMER

TURBO AUDIO/ SKIP TAPE

TIMER MUTE SEARCH MANAGER

JOG/SHTL	REC /OTR
REV	FWD

Helpful Hints

•If you leave the VCR on past the sched- uled start time of a timer recording, you will not be asked again to turn off the VCR.The VCR might store the recording for the same time and day in the next year. Or, the VCR may start recording when you turn off the VCR power.

•If the end of the tape is reached dur- ing a timer recording, recording will stop.The VCR will eject the tape, then turn itself off.

•If the timer recording you just pro- grammed overlaps another timer recording, PROGRAM NOT COMPLET- ED/PROGRAM OVERLAP will appear. Details are on page 46.

•If you forget to turn off the VCR,

PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording is set to begin.To remove the message, press the CLEAR button.