EN 21
Playback Features
NOTES:
●Refer to the
SHUTTLE ring illustration on the right as you read the following procedures.
●Reverse playback
is possible only with a tape recorded in SP mode.
ATTENTION
●The operations by JOG dial/SHUTTLE ring do not include TimeScan. ( pg. 24)
●Picture may not appear during
●Noise may appear or the picture may appear distorted with an
●In the
●When normal playback resumes from search (including TimeScan), still, slow motion or
Variable Speed Search
During playback or still, turn the SHUTTLE ring to the right for forward
NOTE:
Variable speed search with TimeScan ( pg. 24) can be used by pressing the remote control’s w or e button.
Still Picture/Frame-By-Frame Playback
1Pause during playback.
Press 9.
●If there is vertical jitter, use the PR buttons to correct the picture.
●During still picture, the sound from the previous 3 seconds (approx.) will be played back repeatedly (provided there was at least 6 seconds of normal playback prior to engaging the pause mode).
●“TIME SCAN AUDIO” must be set to “ON”, or you cannot hear the sound during still picture. ( pg. 71)
2Activate frame-by-frame playback.
Turn the JOG dial to the right for forward
OR
Press 9.
OR
Press w or e.
Slow Motion
During playback or still, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion (refer to the illustration on the left).
OR
During still picture, press and hold 9 for 2 seconds, then release. Press 9 and release again to return to still picture.
OR
During still picture, press and hold w or e. Release to return to still picture.
NOTES:
●For Time Jog, see page 25.
●Manual tracking is possible during slow motion playback. ( pg. 23)
High-Speed (Turbo) Search
During playback or still, turn the SHUTTLE ring all the way to the right for forward
OR
During playback or still, press 5 for forward
NOTE:
For short searches, press and hold 5 or 3 for over 2 seconds during playback or still picture. When released, normal playback resumes.
To resume normal playback, press 4.