JVC LPT0328 specifications Instant Timer Recording ITR, Tape Remaining Time

Page 27

EN 27

Recording Features

Record One Programme While Watching Another

If your recorder is connected to the TV via the AV connection, press TV/VCR. The recorder’s VCR indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

●The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the recorder’s PR buttons is recorded on the tape.

●If a decoder is connected to the recorder ( pg. 66), you can select a scrambled channel as well with the TV channel controls.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

1Start recording.

Press 7 on the recorder.

2Engage the ITR mode.

Press 7 again. “o” blinks and “0:30” appears on the front display panel.

3Set the recording duration.

If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the 7 button on the recorder’s front panel.

Elapsed Recording Time Indication

1Set the counter display.

Press – –:– – until a counter reading appears on the front display panel.

2Reset the counter.

Press 0000 before starting recording or playback.

●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.

Tape Remaining Time

Press – –:– – until the time remaining on the tape appears.

●The front display panel shows the tape remaining time with “y” displayed.

●By pressing the – –:– – button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.

*Channel position is not displayed during playback.

NOTE:

Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear, or the display may blink on occasion.

Image 27

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Inside View of Front Panel Rear View ON-SCREEN Display Remote Control Remote Control LCD How To UseConnect the recorder to TV Check the contents10 EN Situate the recorder8To connect to a TV with S-VIDEO/AUDIO in connectors Plug the end of the mains power cord into a mains outletVideo Connection Select your country Auto Set Up12 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download14 EN Set the video channelJust Clock Language for the on-screen display16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 20 EN Basic PlaybackPause during playback Variable Speed SearchSlow Motion High-Speed Turbo SearchManual Index Mark/Erase 22 ENSkip Search Index SearchManual Tracking Next Function MemoryDigital TBC/NR Repeat PlaybackActivate Variable Speed Search Audio signal during TimeScanTimeScan 24 ENTimeScan 26 EN Tape Remaining Time Instant Timer Recording ITRLocate the start point Engage the Record-Pause mode28 EN RetakeAudio Recording Level Control Engage the S-VHS ET modeAdjust the audio recording level Super VHS ET S-VHS ETReceiving Stereo and Bilingual Programmes On-screen DisplayReceived Recording Playback32 EN Access the Showview displayAccess the Showview screen Access the Showview Program screenGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users34 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position36 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify38 EN Select the L-2 Select modeRecording mode Programme RecordingRe-supply the power Remote A/B Code SwitchingRemove the power supply Set the remote control codeOperate the TV TV Multi-Brand Remote Control40 EN Set the TV brand codeSatellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver Check Memory Navigation42 EN Navigation PlaybackTurn off Navigation Turn Off NavigationVideo Navigation Title Screen Check the memoryFind Blank Space Access the Find Blank Space screenEdit Title 44 ENSelect the tape title Access the Edit Title screenEdit Tape Title Entering CharacterEnter the programme title 46 ENChoice of Category Select the programmeDelete the programme data Delete Tape DataDelete Programme Data Delete the tape dataSort By Tape Number Access the Find Title screenFind Title 48 ENSelect the programme Access the Tape No. screenAccess the Date screen Sort By DateCategory you want to watch Access the Category screen50 EN Sort By CategoryStart the camcorder Set the recorder’s input modeSet the edit mode Edit From a CamcorderOutput/Input Set Decoder connector Select and L-2 Input Setting54 EN Another Video RecorderRecorder Player CD player, etc Audio Dubbing56 EN Pre-recorded tape Audio-dubbed tapePress AUX number key 0 and/or PR to select F-1 or S-1 Engage the Audio Dubbing modeStart dubbing End Audio DubbingAfter Insert Editing Insert Editing58 EN Source tape Before Insert Editing Recording tapeStart Editing Engage the Insert Editing modeAV Insert Editing Locate the end pointStart playback of the source cassette Access the R.A.Edit screen60 EN Load the source cassetteEnd Random Assemble Editing Memory CapacityPrepare the recording deck Start Random Assemble EditingPress Synchro 7/79 62 ENStart Synchro Editing Pause Synchro EditingExamples Access the Jlip ID No. Set screenSet the Jlip ID number Jlip ID NumberSimple Connections Connecting To a Satellite ReceiverSatellite receiver Decoder Back of recorder Perfect ConnectionsSet the tuner Select the input mode66 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 70 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 72 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 74 ENDelete a Channel When Receiving a Scrambled Broadcast76 EN Set Stations aSet Stations B Station Name TV Station And ID List78 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program NumberAccess the Clock Set screen Clock Set80 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data82 EN TroubleshootingRecording 84 EN Other ProblemsPlayback 86 EN Clock Set Preset DownloadTimer Warning Display TimeScan Tuner Set AV Insert Editing S.T. Picture SystemCountry code International telephone Language code