JVC LPT0328 specifications 26 EN

Page 26

26 EN

RECORDING

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 27) or timer recording ( pg. 32, 34), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder’s power comes on automatically and the counter is reset to “0:00:00”.

●While “– – – –” is blinking on the front display panel, the tape will run for a few seconds to search for the tape number.

B Choose a programme.

Press PR +/– or the number keys to select the channel you wish to record.

C Set the tape speed.

Press SP/LP/EP (p). Check the SP/LP/EP indicator on the recorder’s front display panel to confirm the selected tape speed.

●In EP mode, the recording time is extended three times.

●If you record a programme in EP mode on this recorder, it is recommended to play back the EP-recorded tape on this recorder.

●It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 71)

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

B.E.S.T. takes place at the beginning of both the first SP and the first LP (or EP) recording after inserting the cassette. ( pg. 31)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 69).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

F Stop recording.

Press 8, or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 26

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Inside View of Front Panel Rear View ON-SCREEN Display Remote Control How To Use Remote Control LCDSituate the recorder Check the contents10 EN Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Turn on the recorder Auto Set Up12 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download14 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 16 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 20 ENHigh-Speed Turbo Search Variable Speed SearchSlow Motion Pause during playbackIndex Search 22 ENSkip Search Manual Index Mark/EraseRepeat Playback Next Function MemoryDigital TBC/NR Manual Tracking24 EN Audio signal during TimeScanTimeScan Activate Variable Speed SearchTimeScan 26 EN Instant Timer Recording ITR Tape Remaining TimeRetake Engage the Record-Pause mode28 EN Locate the start pointSuper VHS ET S-VHS ET Engage the S-VHS ET modeAdjust the audio recording level Audio Recording Level ControlReceived Receiving Stereo and Bilingual ProgrammesOn-screen Display Playback RecordingAccess the Showview Program screen Access the Showview displayAccess the Showview screen 32 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 34 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+36 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 38 ENSet the remote control code Remote A/B Code SwitchingRemove the power supply Re-supply the powerSet the TV brand code TV Multi-Brand Remote Control40 EN Operate the TVOperate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Navigation Playback Navigation42 EN Check MemoryCheck the memory Turn Off NavigationVideo Navigation Title Screen Turn off Navigation44 EN Access the Find Blank Space screenEdit Title Find Blank SpaceEntering Character Access the Edit Title screenEdit Tape Title Select the tape titleSelect the programme 46 ENChoice of Category Enter the programme titleDelete the tape data Delete Tape DataDelete Programme Data Delete the programme data48 EN Access the Find Title screenFind Title Sort By Tape NumberSort By Date Access the Tape No. screenAccess the Date screen Select the programmeSort By Category Access the Category screen50 EN Category you want to watchEdit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorderOutput/Input Set Select and L-2 Input Setting Decoder connectorAnother Video Recorder 54 ENRecorder Player Pre-recorded tape Audio-dubbed tape Audio Dubbing56 EN CD player, etcEnd Audio Dubbing Engage the Audio Dubbing modeStart dubbing Press AUX number key 0 and/or PR to select F-1 or S-1Source tape Before Insert Editing Recording tape Insert Editing58 EN After Insert EditingLocate the end point Engage the Insert Editing modeAV Insert Editing Start EditingLoad the source cassette Access the R.A.Edit screen60 EN Start playback of the source cassetteStart Random Assemble Editing Memory CapacityPrepare the recording deck End Random Assemble EditingPause Synchro Editing 62 ENStart Synchro Editing Press Synchro 7/79Jlip ID Number Access the Jlip ID No. Set screenSet the Jlip ID number ExamplesConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Satellite receiver Decoder Back of recorderConnect the decoder Select the input mode66 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWhen this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is70 EN For ExampleAbout Ntsc Playback 72 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 74 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 76 ENSet Stations a TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 78 ENGuide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program number80 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationTroubleshooting 82 ENRecording Other Problems 84 ENPlayback 86 EN AV Insert Editing S.T. Picture System Preset DownloadTimer Warning Display TimeScan Tuner Set Clock SetInternational telephone Language code Country code