JVC LPT0328 specifications Select and L-2 Input Setting, Decoder connector

Page 53

EN 53

L-2 SELECT and L-2 INPUT Setting

The AV2 (L-2) IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the recorder’s AV2 (L-2) IN/ DECODER connector. Set “L-2 INPUT” to the appropriate mode depending on the output signals of the connected appliance.

Perform steps 1 and 2 of “L-1 OUTPUT and L-1 INPUT Setting” on page 52.

A Select the input mode for the AV2 (L-2) IN/

DECODER connector.

Press rt to move the highlight bar (pointer) to “L-2 SELECT” or “L-2 INPUT”. Then, press OK or e to select the appropriate setting.

*The default setting is bold in the table below.

8L-2 SELECT

A/V: To use this recorder as the recording deck with the player connected to the AV2 (L-2) IN/DECODER connector, or to use the satellite receiver connected to the AV2 (L-2) IN/DECODER connector.

DECODER: To use a decoder connected to the AV2 (L-2) IN/DECODER connector.

SAT: To view a satellite programme with the TV set while the recorder is turned off. ( pg. 64)

8L-2 INPUT

VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

B Return to the normal screen.

NOTES:

●If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/DECODER connector, be sure to set “L-2 SELECT” back to appropriate mode after editing.

●If you are not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/DECODER connector, leave “L-2 SELECT” set to “A/V”.

●The default setting is “A/V”; if the recorder’s memory backup has expired due to a power cut or because the AC was removed from the recorder, “A/V” will be automatically selected when the power is restored to the recorder. If you are using a satellite receiver or a decoder, be sure to set “L-2 SELECT” back to appropriate mode.

●When “L-2 SELECT” is set to “SAT”, “SAT” appears on TV screen or front display panel instead of “L-2” or “L2”.

●If “L-2 SELECT” is set to “DECODER”, it is impossible to set “L-2 INPUT” to “S-VIDEO”.

●If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set “L-2 SELECT” to “DECODER”.

Press MENU.

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Inside View of Front Panel Rear View ON-SCREEN Display Remote Control Remote Control LCD How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet 12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e14 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 20 EN Basic PlaybackSlow Motion Variable Speed SearchHigh-Speed Turbo Search Pause during playbackSkip Search 22 ENIndex Search Manual Index Mark/EraseDigital TBC/NR Next Function MemoryRepeat Playback Manual TrackingTimeScan Audio signal during TimeScan24 EN Activate Variable Speed SearchTimeScan 26 EN Tape Remaining Time Instant Timer Recording ITR28 EN Engage the Record-Pause modeRetake Locate the start pointAdjust the audio recording level Engage the S-VHS ET modeSuper VHS ET S-VHS ET Audio Recording Level ControlReceived Receiving Stereo and Bilingual ProgrammesOn-screen Display Recording PlaybackAccess the Showview screen Access the Showview displayAccess the Showview Program screen 32 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set34 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+36 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording 38 ENRemove the power supply Remote A/B Code SwitchingSet the remote control code Re-supply the power40 EN TV Multi-Brand Remote ControlSet the TV brand code Operate the TVOperate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code 42 EN NavigationNavigation Playback Check MemoryVideo Navigation Title Screen Turn Off NavigationCheck the memory Turn off NavigationEdit Title Access the Find Blank Space screen44 EN Find Blank SpaceEdit Tape Title Access the Edit Title screenEntering Character Select the tape titleChoice of Category 46 ENSelect the programme Enter the programme titleDelete Programme Data Delete Tape DataDelete the tape data Delete the programme dataFind Title Access the Find Title screen48 EN Sort By Tape NumberAccess the Date screen Access the Tape No. screenSort By Date Select the programme50 EN Access the Category screenSort By Category Category you want to watchSet the edit mode Set the recorder’s input modeEdit From a Camcorder Start the camcorderOutput/Input Set Decoder connector Select and L-2 Input Setting54 EN Another Video RecorderRecorder Player 56 EN Audio DubbingPre-recorded tape Audio-dubbed tape CD player, etcStart dubbing Engage the Audio Dubbing modeEnd Audio Dubbing Press AUX number key 0 and/or PR to select F-1 or S-158 EN Insert EditingSource tape Before Insert Editing Recording tape After Insert EditingAV Insert Editing Engage the Insert Editing modeLocate the end point Start Editing60 EN Access the R.A.Edit screenLoad the source cassette Start playback of the source cassettePrepare the recording deck Memory CapacityStart Random Assemble Editing End Random Assemble EditingStart Synchro Editing 62 ENPause Synchro Editing Press Synchro 7/79Set the Jlip ID number Access the Jlip ID No. Set screenJlip ID Number ExamplesSimple Connections Connecting To a Satellite ReceiverSatellite receiver Decoder Back of recorder Perfect Connections66 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 70 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen72 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 74 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 76 ENSet Stations a Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 78 ENGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program number80 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation82 EN TroubleshootingRecording 84 EN Other ProblemsPlayback 86 EN Timer Warning Display TimeScan Tuner Set Preset DownloadAV Insert Editing S.T. Picture System Clock SetCountry code International telephone Language code
Top Page Image Contents