JVC LPT0345-001B manual Basic Playback, Load a cassette, Start playback

Page 15

BASIC PLAYBACK AND RECORDING

EN 15

Basic

Playback

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

POWER	2 FF ( ` )
	SP EP
	VCR
	REW (1 )	STOP/EJECT
		( 7 / 0 )

POWER

1 2 3

2

4 5 6

7 8 9

0 4

2

1

REW ( 1 ) FF ( ` )

STOP ( 7 )

1 Load a cassette

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR.

Do not apply too much pressure when inserting.

The VCR turns on automatically.

The counter is automatically reset to “0:00:00”. If the cassette’s record safety tab has been removed, playback begins automatically.

2Start playback

Press PLAY ( 3 ).

Tape speed (SP or EP) is automatically detected.

To stop playback

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

To rewind the tape

Press REW ( 1 ).

To fast-forward the tape

Press FF ( ` ).

To eject the tape

Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.

You can also eject the cassette with the VCR turned off.

To turn off the VCR

Press POWER.

INFORMATION

This VCR is equipped with SQPB (S-VHS QUASI PLAYBACK) that lets you watch tapes recorded in the S- VHS format with regular VHS resolution.

SQPB does not deliver Super VHS resolution. S-VHS recording is not possible with this VCR.

Clean the video heads using a dry cleaning cassette — TCL-2UX — when:

•Rough, poor picture appears while a tape is played back.

•The picture is unclear or no picture appears.

•“USE CLEANING CASSETTE” appears on the screen (only with “SUPERIMPOSE” set to “ON”: pg. 31.)

Image 15

Contents HR-VP58U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Page Final preparation for use Check contentsSituate VCR Connect VCR to TVAuto blinks Channel numbers are displayed Plug & Play SettingPerform Plug & Play setup Clock and tuner channels will be set automaticallySelect language Language SettingAccess Main Menu screen Access Initial Set screenIf you use a cable box, set the clock manually. pg Clock SettingPreparations Select clock setSelect time zone Setting clock semiautomaticallySet Auto Clock to on Select host channelTo make corrections any time during the process Setting clock manuallySelect D.S.T. mode Manual Clock SetTuner Setting Access Tuner Set screenPerform Auto Channel Set Manual Channel Set Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsBasic Playback Load a cassetteStart playback Playing back tape repeatedly Basic Playback FeaturesChanging display information Checking tape positionAdjusting tracking condition Selecting monitor soundAutomatic operations after Start search Locating beginning of timerAccess distant code Locating beginningStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording FeaturesEngage TV mode Specifying recording lengthShowing on-screen display Display VCR status on TV screenErase on-screen display Variable-Speed Picture Search Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchPause during playback Viewing still pictureSkipping unwanted portions Viewing slow motion pictureVCR Plus+ Timer Programing Press SP/EP Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching VCR Plus+ SetupInput guide channel number Access Guide Channel Set screenExpress Timer Programing Press SP/EP to set the tape speed To timer-record daily Monday-Friday or weekly serialsCancel or change program setting Checking program settingsDisengage timer Cancelingsettings or changing programConfirm overlapping programs Select program to modifyOverlapping programs blink on the screen On the Remote Press OK or Shuttle Plus # Useful Function SettingsChange setting Select FunctionWhen this function is set to OFF When this function is set to onFor Example Entire program while timer-recording in SP modeWhen receiving a channel not in use When stopping playback2ND Audio Record Connection Edit To Or From AnotherOperate TV TV Brand SettingTurn on the TV Set TV brand codeOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeOperate DBS receiver DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand codePlug in VCR Changing Remote Control CodeSet remote control code for Remote Unplug VCRPower 42EN Other Problems What happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?List of terms Repeat playRF connection Front display panel Front panelPage Page Specifications 50 EN Limited Warranty HR-VP68U