JVC LPT0345-001B Changing Remote Control Code, Unplug VCR, Set remote control code for Remote

Page 40

40 EN

MULTI-BRAND REMOTE CONTROL (cont.)

Changing

Remote Control

Code

4

2–1

1	2	3
			2	2–2, 3
4	5	6

7	8	9
	0		4

1

3

2–3

This Remote is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals.

This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR and the Remote to respond to B code signals.

When using two JVC VCRs, set two VCRs and their Remotes to different codes, so that you can operate these VCRs separately.

1 Unplug VCR

Unplug the AC power cord from the AC outlet.

2 Set remote control code for Remote

1 Press and hold A/B.

2 Press the Number key “2”.

3 Press OK, and release A/B.

The Remote now can transmit B code control signals.

3 Plug in VCR

Plug the AC power cord back into an AC outlet.

4 Turn on VCR

Press POWER on the Remote.

The VCR now responds to B code control signals.

To set the Remote and the VCR back to A code control signals, repeat the same procedure as shown above except pressing the Number key “1” in step 2.

To control two VCRs with the same Remote

You can control two JVC VCRs by switching the remote control code for the Remote between A and B ( step 2), keeping two VCRs to different control codes.

Press the Number key “1” for A code control signals and the Number key “2” for B code control signals. (To change only the remote control code for the Remote, DO NOT perform steps 1, 3, and 4 .)

(Ex.) To set Remote to B code:

MBRSET

A/B

	E
2	NTER/O		SD	Release
	3	OK

Hold	Press in succession
down

Image 40

Contents HR-VP58U Dear Customer Telephone NumberPower Sources Power LinesPower Cord Protection Grounding or PolarizationAccessories Damage Requiring ServiceCleaning Replacement PartsContents Page Check contents Situate VCRConnect VCR to TV Final preparation for usePlug & Play Setting Perform Plug & Play setupClock and tuner channels will be set automatically Auto blinks Channel numbers are displayedLanguage Setting Access Main Menu screenAccess Initial Set screen Select languageClock Setting PreparationsSelect clock set If you use a cable box, set the clock manually. pgSetting clock semiautomatically Set Auto Clock to onSelect host channel Select time zoneSetting clock manually Select D.S.T. modeManual Clock Set To make corrections any time during the processAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Setting channels manually Access Manual Channel Set screenAdd or skip desired channels Manual Channel SetLoad a cassette Basic PlaybackStart playback Basic Playback Features Changing display informationChecking tape position Playing back tape repeatedlySelecting monitor sound Adjusting tracking conditionAutomatic operations after Locating beginning of timer Access distant codeLocating beginning Start searchBasic Recording Select recording channelSet tape speed Start recordingBasic Recording Features Engage TV modeSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Special Effect Playback Locating particular sceneRapidly Picture Search High-Speed Picture Search Variable-Speed Picture SearchViewing still picture Skipping unwanted portionsViewing slow motion picture Pause during playbackVCR Plus+ Timer Programing Engage timer recording standby mode To use the VCR while it is in timer recording standby modeInput receiving channel number Press SP/EPVCR Plus+ Setup VCR Plus+ guide channel matchingAccess Guide Channel Set screen Input guide channel numberExpress Timer Programing To timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings Disengage timerCancelingsettings or changing program Cancel or change program settingSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen Useful Function Settings Change settingSelect Function On the Remote Press OK or Shuttle Plus #When this function is set to on When this function is set to OFFEntire program while timer-recording in SP mode When receiving a channel not in useWhen stopping playback For Example2ND Audio Record Edit To Or From Another ConnectionTV Brand Setting Turn on the TVSet TV brand code Operate TVCable Box Brand Setting Turn on the cable boxEnter cable box brand code Operate cable boxDBS Receiver Brand Setting Turn on the DBS receiverEnter DBS receiver brand code Operate DBS receiverChanging Remote Control Code Set remote control code for RemoteUnplug VCR Plug in VCRPower 42EN Other Problems Can the VCR indefinitely remain in still mode? What happens if the tape reaches its end during recording?Repeat play List of termsRF connection Front panel Front display panelPage Page Specifications 50 EN Limited Warranty HR-VP68U