JVC LPT0345-001B manual Other Problems

Page 43

						EN 43

	OTHER PROBLEMS

		SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
	1.	When scanning channels, some of		Those channels have been preset to		If you need the skipped channels,
		them are skipped over.		be skipped.		restore them ( pg. 14).

	2.	The channel cannot be changed.		Recording is in progress.		Press PAUSE ( 8 ) to pause the
						recording, change channels, then
						press PLAY ( 3 ) to resume recording.
	3.	The Remote will not operate your		The brand codes are set incorrectly.		Reset the correct brand codes ( pg.
		TV or cable box or DBS receiver.				37, 38, or 39).

	4.	Even though Auto or Semiauto		The clock setting data received from		Select a different host channel during
		Clock Set has been performed, the		the host channel is incorrect.		Semiauto Clock Set ( pg. 11), or
		clock is incorrect.				perform Manual Clock Set ( pg. 12).

MOISTURE CONDENSATION

Moisture in the air will condense on the VCR when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form on the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the VCR turned on for a few hours to evaporate the moisture before inserting a tape.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.

ATTENTION

This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR does not operate correctly switch its power off and unplug the AC power cord from the AC supply. Wait for a while and then plug the power back in. Eject and check the condition of the cassette. If everything appears normal, you can operate the VCR as usual.

Image 43

Contents HR-VP58U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Page Final preparation for use Check contentsSituate VCR Connect VCR to TVAuto blinks Channel numbers are displayed Plug & Play SettingPerform Plug & Play setup Clock and tuner channels will be set automaticallySelect language Language SettingAccess Main Menu screen Access Initial Set screenIf you use a cable box, set the clock manually. pg Clock SettingPreparations Select clock setSelect time zone Setting clock semiautomaticallySet Auto Clock to on Select host channelTo make corrections any time during the process Setting clock manuallySelect D.S.T. mode Manual Clock SetAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Manual Channel Set Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsLoad a cassette Basic PlaybackStart playback Playing back tape repeatedly Basic Playback FeaturesChanging display information Checking tape positionSelecting monitor sound Adjusting tracking conditionAutomatic operations after Start search Locating beginning of timerAccess distant code Locating beginningStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording FeaturesEngage TV mode Specifying recording lengthDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Variable-Speed Picture Search Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchPause during playback Viewing still pictureSkipping unwanted portions Viewing slow motion pictureVCR Plus+ Timer Programing Press SP/EP Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel numberVCR Plus+ guide channel matching VCR Plus+ SetupInput guide channel number Access Guide Channel Set screenExpress Timer Programing Press SP/EP to set the tape speed To timer-record daily Monday-Friday or weekly serialsCancel or change program setting Checking program settingsDisengage timer Cancelingsettings or changing programSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen On the Remote Press OK or Shuttle Plus # Useful Function SettingsChange setting Select FunctionWhen this function is set to OFF When this function is set to onFor Example Entire program while timer-recording in SP modeWhen receiving a channel not in use When stopping playback2ND Audio Record Connection Edit To Or From AnotherOperate TV TV Brand SettingTurn on the TV Set TV brand codeOperate cable box Cable Box Brand SettingTurn on the cable box Enter cable box brand codeOperate DBS receiver DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand code Plug in VCR Changing Remote Control Code Set remote control code for Remote Unplug VCRPower 42EN Other Problems What happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?Repeat play List of termsRF connection Front display panel Front panelPage Page Specifications 50 EN Limited Warranty HR-VP68U