JVC LPT0345-001B manual Can the VCR indefinitely remain in still mode?

Page 44

44 EN

TROUBLESHOOTING (cont.)

Questions and answers

PLAYBACK

Q. What happens if the tape reaches its end during playback or search?

A. The VCR automatically rewinds it to the beginning.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in still mode?

A.No. It stops automatically after 5 minutes to protect

the heads.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During picture search, still picture playback and frame-by-frame playback, the picture is intermittent. What’s the cause?

A.Picture loss occurs when these types of playback are attempted with a tape recorded in LP mode. Pressing PLAY ( 3 ) to return to normal playback will restore

the picture.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When returning from variable-speed picture search to normal playback, the picture is disturbed. Should I be concerned about this?

A. No, it is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When playing back programs that have been timer- recorded consecutively (such one program from 8:00 to 9:00 and another one from 9:00 to 10:00), the picture and sound become momentarily distorted where the first program ends and the second program begins. Is this a malfunction?

A. No. This is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Other than preventing further recording, what effect does removing the safety tab have?

A. It disables marking of index codes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Sometimes, during index search, the VCR cannot find the program I want to see. Why not?

A. There may be index codes too close together.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During playback, on-screen display sometimes jitters. Why does this happen?

A.If the condition of the tape being played back is not good, jittering of the video (including on-screen display) may occur.

RECORDING

Q.When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen?

A.This is normal. It reduces distortion at the pause and

resume points.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in the recording pause mode?

A.No. The VCR automatically stops after 5 minutes to protect the heads. When paused during Instant Timer Recording (ITR), the VCR shuts off automatically after

5 minutes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.What happens if the tape reaches its end during recording?

A.The VCR automatically rewinds it to the beginning.

TIMER RECORDING

Q.REC and ä remain lit on the front display panel. Is there a problem?

A.No. This is a normal condition for a timer recording

in progress.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can I program the timer while I’m watching a tape or a TV broadcast?

A.Yes, but while you are setting the timer you will not see the tape’s or broadcast program’s picture as it is replaced by the on-screen menu. (The sound from the tape or broadcast program will be heard during the timer setting.)

Image 44
Contents HR-VP58U Dear Customer Telephone NumberPower Sources Power LinesPower Cord Protection Grounding or PolarizationAccessories Damage Requiring ServiceCleaning Replacement PartsContents Page Check contents Situate VCRConnect VCR to TV Final preparation for usePlug & Play Setting Perform Plug & Play setupClock and tuner channels will be set automatically Auto blinks Channel numbers are displayedLanguage Setting Access Main Menu screenAccess Initial Set screen Select languageClock Setting PreparationsSelect clock set If you use a cable box, set the clock manually. pgSetting clock semiautomatically Set Auto Clock to onSelect host channel Select time zoneSetting clock manually Select D.S.T. modeManual Clock Set To make corrections any time during the processPerform Auto Channel Set Tuner SettingAccess Tuner Set screen Setting channels manually Access Manual Channel Set screenAdd or skip desired channels Manual Channel SetStart playback Basic PlaybackLoad a cassette Basic Playback Features Changing display informationChecking tape position Playing back tape repeatedlyAutomatic operations after Adjusting tracking conditionSelecting monitor sound Locating beginning of timer Access distant codeLocating beginning Start searchBasic Recording Select recording channelSet tape speed Start recordingBasic Recording Features Engage TV modeSpecifying recording length Watching one program while recording anotherErase on-screen display Showing on-screen displayDisplay VCR status on TV screen Special Effect Playback Locating particular sceneRapidly Picture Search High-Speed Picture Search Variable-Speed Picture SearchViewing still picture Skipping unwanted portionsViewing slow motion picture Pause during playbackVCR Plus+ Timer Programing Engage timer recording standby mode To use the VCR while it is in timer recording standby modeInput receiving channel number Press SP/EPVCR Plus+ Setup VCR Plus+ guide channel matchingAccess Guide Channel Set screen Input guide channel numberExpress Timer Programing To timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings Disengage timerCancelingsettings or changing program Cancel or change program settingOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify Useful Function Settings Change settingSelect Function On the Remote Press OK or Shuttle Plus #When this function is set to on When this function is set to OFFEntire program while timer-recording in SP mode When receiving a channel not in useWhen stopping playback For Example2ND Audio Record Edit To Or From Another ConnectionTV Brand Setting Turn on the TVSet TV brand code Operate TVCable Box Brand Setting Turn on the cable boxEnter cable box brand code Operate cable boxDBS Receiver Brand Setting Turn on the DBS receiverEnter DBS receiver brand code Operate DBS receiverChanging Remote Control Code Set remote control code for RemoteUnplug VCR Plug in VCRPower 42EN Other Problems Can the VCR indefinitely remain in still mode? What happens if the tape reaches its end during recording?RF connection List of termsRepeat play Front panel Front display panelPage Page Specifications 50 EN Limited Warranty HR-VP68U