EN 19
Basic
Recording
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
FF ( ` )
PLAY ( 3 ) 
POWER
REW ( 1 ) 
1 Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.
2Select recording channel
On the front panel:
Press CH5°.
On the Remote:
a– Press CH + or –. or
b– Press the Number keys.
If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the front display panel, to view the program to be recorded.
SP EP
VCR
2 3
4
STOP/EJECT 
( 7 / 0 ) PAUSE ( 8 )
3
4
Set tape speed
Press SP/EP to set the recording speed.
Start recording
On the front panel:
Press REC ( ƒ ).
On the Remote:
While holding REC ( ƒ ), press PLAY ( 3 ).
TV/VCR
1
4
7
1
REW ( 1 )
4
POWER
2 3
2
5 6 
2–b
8 9
0 | 4 |
|
3
FF ( ` )
PAUSE ( 8 )
STOP ( 7 )
To pause recording
Press PAUSE ( 8). To resume recording, press PLAY ( 3 ).
To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.
To rewind the tape
Press REW ( 1 ) (or turn the SHUTTLE ring on the front panel to the left).
To
Press FF ( ` ) (or turn the SHUTTLE ring on the front panel to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.
You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab