JVC LPT0345-001B manual VCR Plus+ Timer Programing

PRESS NUMBER KEY (0–9) PRESS (+/–) TO SET

EXPRESS PROGRAMMING PRESS (PROG.) TO END

VCR PLUS+

24EN TIMER RECORDING

VCR Plus+

Timer

Programing

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

POWER

Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 8 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method ( pg. 28) as far as a year in advance.

The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR’s timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.)

1 Load a cassette

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.

The VCR turns on, and the counter is reset, automatically.

DAILY

CANCEL

STOP +/–

27

1 2

4	5
7	8

0

1

3
	2	34
6
9		WEEKLY
		8
		4
		6

2 Access VCR Plus+ screen Press PROG. on the Remote.

The clock must be set to access the VCR Plus+ screen.

If you have not set the clock, the Main Menu

screen appears after an error message is displayed. Refer to page 8 for the Plug & Play setting or page 10 for the clock setting procedure.

347

Enter PlusCode number
3 Press the appropriate		VCR PLUS+
Number keys to input
the PlusCode number
		123
printed in the TV
listings for the TV
broadcast you wish to
	PRESS NUMBER KEY (0–9)
record, then press OK.			THEN (OK)
	PRESS (PROG.) TO END

Then;

If the Guide Channel Set screen appears

— go to step 4.

If the VCR Plus+ Program screen appears

— go to step 5.

To make corrections, press CANCEL and input the correct PlusCode number.