Edit From A Camcorder
23
You can use a camcorder as the source player and your video recorder as the recorder.
1 | MAKE CONNECTIONS |
Connect the camcorder’s AUDIO/VIDEO OUT | |
connectors to the recorder’s rear panel AV2 IN or AV1 | |
IN/OUT connector via the optional cable adapter. |
1 2 3
4 5 6
7 8 9
AUX0
1 | ? |
Recorder
2
4
TV PROG
| SET RECORDER’S INPUT |
2 | MODE |
Press AUX and/or TV PROG to select the appropriate | |
input mode depending on the connector being used; | |
| AV2 IN connector. |
3 | SET EDIT MODE |
See "Picture Control" on page 24. | |
4 | START CAMCORDER |
Engage its Play mode. | |
5 | START RECORDER |
Engage its Record mode. |
NOTES:
●All necessary cables can be obtained from your dealer.
●When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.
|
| ENTREE |
|
| ANT. IN |
AV2 ENTREE/DECODEUR | AV1 ENTREE/SORTIE | ANTENNE |
IN/DECODER | IN/OUT | SORTIE |
|
| RF OUT |
Cable adapter (not provided)
VIDEO OUT | Audio/Video Cable |
| (not provided) |
Camcorder |
|
AUDIO OUT |
|