JVC HR-J746MS Basic Connections, Check Contents, Situate Recorder, Connect Recorder to TV

Page 10

10

INSTALLINGYOURNEWRECORDER

Basic Connections

RF Cable (provided)

Antenna adapter (provided)

21

(no

Aerial terminal

Back of TV

21-pin SCART connector
It's essential that your video recorder be properly connected.	Mains Power
Follow these steps carefully. THESE STEPS MUST BE COMPLETED	Mains Power
BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.	Cord

1

2

3

4

CHECK CONTENTS

Make sure the package contains all of the accessories listed in “Specifications” (☞ pg. 55).

SITUATE RECORDER

Place the recorder on a stable, horizontal surface.

CONNECT RECORDER TO TV

a– Disconnect the TV aerial cable from the TV. b– Connect the TV aerial cable to the ENTREE

ANTENNE jack on the rear panel of the recorder. c– Connect the provided RF cable between the SORTIE

ANTENNE jack on the rear panel of the recorder and the TV’s aerial terminal with the provided antenna adapter directly connected to the TV as illustrated.

d– Connect the provided SCART cable between the AV1 ENTREE/SORTIE socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

CONNECT RECORDER TO MAINS

Plug the end of the mains power cord into a mains outlet.

D

SOR

Mains outlet

21-pin SCART Cable (provided)

Image 10

Contents HR-J746MS Pour votre sécurité Précautions à observer En cas de transportHR-J449MS has only one audio input connector IndexRear View HR-J749MS HR-J449MS Display Panel J746MS Display Panel J449MS Remote Control Installing Batteries How To UseSituate Recorder Check ContentsBasic Connections Connect Recorder to TVDECODER-RECORDER Connection Canal Plus Pin Scart Cable ot provided TV Aerial Cable DecoderMake Connections Connection To Stereo System HR-J746MS OnlyBack of Recorder Speaker AUX in or Tape Monitor FM Tuner CD Player Stereo AmplifierTelevision Speaker Perform Auto SET UP Auto Set UpAuto channel Set/Auto Clock Set/Auto Guide Channel Set If auto channel set has succeeded but auto clock set has not Turn on the Recorder Access Menu Principal ScreenTuner Set Perform Auto Channel SETReturn to Normal Screen Press MenuUsing Confirmation Screen Select NEW Position Select ItemDelete Channel Delete a ChannelSwitch Stations Access Manual CH. SET ScreenPerform Tuning Select Channel to FINE-TUNETV Station And ID List Clock Set PreparationSET Date and Time PresetSET Clock Automatically SET Just ClockMake List of Stored Station Names Preset Positions SetupGuide Channel Set Number When Using a Satellite ReceiverClose Menu SET TV Brand Code TV Multi Brand Remote ControlControl Your TV Using Additional Buttons TRY Operating TVSET Satellite Receiver Brand Code Satellite Re- ceiver Multi- Brand Remote ControlTRY Operating Satellite Receiver Basic PlaybackPause During Playback Playback FeaturesActivate FRAME-BY Frame Playback Search Adjust TrackingActivate HIGH-SPEED Override Automatic TrackingActivate Repeat Activate 3R PicturePlayback Index Search Activate Index SearchActivate Instant Review Instant ReViewActivate Scene Finder SET A/B Code SwitchRE-SUPPLY Power Stop Scene FinderSpatializer HR-J746MS only Activate SpatializerSoundtrack Selection HR-J746MS Only Basic Recording S.T. Picture System Access Autres Reglages ScreenAccess Menu Principal RecordingPlayback On-Screen Displays ENABLE/DISABLEON-SCREEN Display Reset Counter Recording FeaturesSelect Preset to Watch SET Counter DisplayTo Record Nicam Stereo Bilingual Programmes HR-J746MS Only Receiving Stereo And Bilin- gual Programmes HR-J746MS OnlyType of Broadcast On-screen Display Being Received Instant Timer Recording ITR Engage ITR ModeSET Recording Duration Access Showview Program Screen Showview Timer RecordingAccess Timer Programming Screen Enter Showview NumberReturn to Normal Timer ModeEngage RECORDER’S Access Programme Regular Timer ProgrammingTime Engage RECORDER’S Timer Mode Enter Preset PositionPress Chaine + Revise Programme Auto TimerCheck And Cancel Programmes Screen AND/OR DisplayTimer Warning TimerAuto VN/LD Timer Engage Auto VN/LDStart Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder PlayerYour recorder Recorder PlayerMode Edit From a CamcorderSET RECORDER’S Input Start CamcorderHi-Fi and normal audio Tape recorded with this recorderPanel with Auto Timer set to a Indicator off ClearTimer Recording Questions and Answers Band HR-J746MS/449MS