JVC HR-J746MS, HR-J449MS instruction manual Regular Timer Programming, Access Programme

44TIMERRECORDING(cont.)

Regular Timer Programming

Remember, the clock must be set before you can progamme the timer (☞ pg. 22).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the AV mode.

q

	2
1	2		3
4	5		6
7	8		–9
		FIN	+/
	0		4

DATE +/–

DEBUT +/–

3

PROG. 1

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

ACCESS TIMER PROGRAMMING SCREEN

1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
	Press DEBUT +/–. (If				– P1 –
	you’re just starting out,
2 “Program 1” appears.)			DEBUT				FIN
				–:– –	=		–:– –
				VN				M.
			DATE			CHAINE
			25.12					– –
		[+/–] =
		[MENU] : SORTIE

The front display panel looks like this:

VN

	ENTER PROGRAMME
	START TIME
	Press DEBUT +/– to enter				– P1 –
	the time you want
				DEBUT			FIN
3 recording to start.
				21:00	=		–:– –
	● Press and hold DEBUT			VN				M.
	+/– to move in 30-			DATE		CHAINE
	minute increments, or
			25.12					– –
	press and release
		[+/–] =
	repeatedly to move 1
		[MENU] : SORTIE
	minute at a time.

The front display panel looks like this:

VN

	ENTER PROGRAMME STOP
	TIME
	Press FIN +/– to enter the time you want recording to
4 stop.
5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)