JVC HR-J746MS Edit From a Camcorder, SET RECORDER’S Input, Mode, Start Camcorder, Start Recorder

Page 50

50

EDITING(cont.)

Edit From A Camcorder

	2
1	2	3		"0"
4	5	NUMBER
4	5	6
7	8	9
	0		4

CHAINE

3

1

You can use a camcorder as the source player and your video recorder as the recorder.

MAKE CONNECTIONS

1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s front panel AUDIO/VIDEO input connectors.

For HR-J746MS owners...

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO G input connector on your recorder.

For HR-J449MS owners...

●When using a Hi-Fi camcorder, connect its AUDIO OUT L connector to the AUDIO input connector on your recorder.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.

	SET RECORDER’S INPUT
	MODE
	Press NUMBER key “0” and/or CHAINE so that “F-AU”
2 appears in place of a channel number.
3	START CAMCORDER
3	Engage its Play mode.
4	START RECORDER
4	Engage its Record mode.

Recorder

Your recorder

q

		To rear panel TELEC.
VIDEO		connector
input	AUDIO
	input
	Audio/Video Cable	Mini-Plug Cable
	(not provided)	Mini-Plug Cable
		(not provided)
	VIDEO OUT	(JVC camcorder
		only)

Camcorder

AUDIO OUT

IMPORTANT

Before you start editing, be sure to select the appropriate colour system by pressing SYSTEME COULEUR depending on the system of the connected recorder or camcorder. ☞ p. 51

Player

EDIT

Image 50

Contents HR-J746MS Pour votre sécurité Précautions à observer En cas de transportHR-J449MS has only one audio input connector IndexRear View HR-J749MS HR-J449MS Display Panel J746MS Display Panel J449MS Remote Control Installing Batteries How To UseSituate Recorder Check ContentsBasic Connections Connect Recorder to TVDECODER-RECORDER Connection Canal Plus Pin Scart Cable ot provided TV Aerial Cable DecoderBack of Recorder Connection To Stereo System HR-J746MS OnlyMake Connections Television Speaker AUX in or Tape Monitor FM Tuner CD Player Stereo AmplifierSpeaker Auto channel Set/Auto Clock Set/Auto Guide Channel Set Auto Set UpPerform Auto SET UP If auto channel set has succeeded but auto clock set has not Turn on the Recorder Access Menu Principal ScreenTuner Set Perform Auto Channel SETReturn to Normal Screen Press MenuUsing Confirmation Screen Select NEW Position Select ItemDelete Channel Delete a ChannelSwitch Stations Access Manual CH. SET ScreenPerform Tuning Select Channel to FINE-TUNETV Station And ID List Clock Set PreparationSET Date and Time PresetSET Clock Automatically SET Just ClockGuide Channel Set SetupMake List of Stored Station Names Preset Positions Close Menu When Using a Satellite ReceiverNumber SET TV Brand Code TV Multi Brand Remote ControlControl Your TV Using Additional Buttons TRY Operating TVTRY Operating Satellite Receiver Satellite Re- ceiver Multi- Brand Remote ControlSET Satellite Receiver Brand Code Basic PlaybackActivate FRAME-BY Frame Playback Playback FeaturesPause During Playback Search Adjust TrackingActivate HIGH-SPEED Override Automatic TrackingPlayback Activate 3R PictureActivate Repeat Index Search Activate Index SearchActivate Instant Review Instant ReViewActivate Scene Finder SET A/B Code SwitchRE-SUPPLY Power Stop Scene FinderSoundtrack Selection HR-J746MS Only Activate SpatializerSpatializer HR-J746MS only Basic Recording S.T. Picture System Access Autres Reglages ScreenAccess Menu Principal RecordingPlayback ON-SCREEN Display ENABLE/DISABLEOn-Screen Displays Reset Counter Recording FeaturesSelect Preset to Watch SET Counter DisplayType of Broadcast On-screen Display Being Received Receiving Stereo And Bilin- gual Programmes HR-J746MS OnlyTo Record Nicam Stereo Bilingual Programmes HR-J746MS Only SET Recording Duration Engage ITR ModeInstant Timer Recording ITR Access Showview Program Screen Showview Timer RecordingAccess Timer Programming Screen Enter Showview NumberEngage RECORDER’S Timer ModeReturn to Normal Time Regular Timer ProgrammingAccess Programme Press Chaine + Enter Preset PositionEngage RECORDER’S Timer Mode Revise Programme Auto TimerCheck And Cancel Programmes Screen AND/OR DisplayTimer Warning TimerAuto VN/LD Timer Engage Auto VN/LDStart Source Player Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder PlayerYour recorder Recorder PlayerMode Edit From a CamcorderSET RECORDER’S Input Start CamcorderHi-Fi and normal audio Tape recorded with this recorderPanel with Auto Timer set to a Indicator off ClearTimer Recording Questions and Answers Band HR-J746MS/449MS