JVC HR-J746MS, HR-J449MS instruction manual Using Confirmation Screen

18INITIALSETTINGS(cont.)

Using The

Confirmation

Screen

	2
1	2	3
4	5	6
7	8	9
NUMBER	0	4

3 OK

MENU	1
-FONCTIONS
MULTI

When Receiving A Scrambled Broadcast

Make sure that "SELECTION AV2" is set to "DECODEUR" (☞ pg. 49).

1– Perform steps 1 and 2 in the right column.

2– Press MULTI-FONCTIONS%ÞÞ%to select the position of the channel broadcasting the scrambled programmes, then press OK three times.

3– Press MULTI-FONCTIONS%until "DECODEUR" begins blinking, and set it to "M." by pressing MULTI-

FONCTIONS %Þ.

4– Press OK to access the Confirmation screen.

●Repeat steps 2 – 4 for each additional channel.

5– Press MENU.

Storing Channels Manually

Store channels that were not stored during Auto Channel Set.

ACCESS MENU PRINCIPAL SCREEN

1 Press MENU twice.

ACCESS CONFIRMATION SCREEN

2 Move the highlight bar (pointer) to "REGL.MANUEL CANAUX" by pressing MULTI-FONCTIONS%Þ, then press OK. The Confirmation screen appears.

SELECT POSITION

3 Press MULTI-FONCTIONS%Þ% %until an open position in which you want to store a channel begins blinking, then press OK. The Manual Ch. Set screen appears.

INPUT CHANNEL

4 The number "02" appears blinking to the right of "CH". Press the NUMBER keys to input the channel number you want to store.

●For fine tuning adjustment, press MULTI-FONCTIONS

%until the item under "CH" begins blinking, then press

MULTI-FONCTIONS%Þ. While tuning, “F+” or “F–” appears.

●If necessary, to change the band*, press MULTI- FONCTIONS Þuntil CF begins blinking, then press MULTI-FONCTIONS%Þ to select the band.

*The band indication changes as follows: CF (SECAM L normal channel) → CA (SECAM L cable network) → CH (PAL or SECAM B/G normal channel) → CC (PAL or SECAM B/G cable network).

●When storing a channel that sends scrambled

broadcasts, press MULTI-FONCTIONS%until "DECODEUR" blinks, then press MULTI-FONCTIONS%Þ to set "DECODEUR" to "M." ("A." is the default setting).

	ENTER NEW CHANNEL
5	INFORMATION
	Press OK, and the Confirmation screen appears.
	● Repeat steps 3 through 5 as necessary.
	CLOSE CONFIRMATION
6	SCREEN
	Press MENU.
	● To input the station name, see page 20.
	● To change positions, see "Change Station Channel
	Position" (☞ pg. 19).