JVC HR-J449MS, HR-J746MS instruction manual Basic Recording

Page 35

RECORDING

35

Basic

Recording

Turn on the TV and select the AV mode.

q

VN/LD

CHAINE

UMBER	2
	2
1	2	3
4	5	6
7	8	9
	0	4

CHAINE

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1		LOAD A CASSETTE
		Insert a cassette with the record safety tab intact.

		● The counter is reset to 0:00:00 and the recorder
		power comes on automatically.

2		CHOOSE A PROGRAMME
		Press CHAINE +/– or the NUMBER keys to select the
		preset you wish to record.

		● The CHAINE dial can also be used to select a preset.

3		SET TAPE SPEED
		Press (VN/LD). Check the VN/LD indicator on the
		recorder display panel to confirm the selected tape speed.
4		START RECORDING
		Press and hold qand 4 on the remote control, or
		press qon the recorder.

		B.E.S.T. takes place at the beginning of both the
		first VN and the first LD recording after inserting
		the cassette (☞ pg. 36).


		PAUSE/RESUME
5		RECORDING
5		Press 6. Press 4($) to resume recording.
6		STOP RECORDING
		Press 5on the remote control or 5/8 on the recorder.
		Then press 5/8to remove the cassette.

3

1

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 35

Contents HR-J746MS Pour votre sécurité En cas de transport Précautions à observerIndex HR-J449MS has only one audio input connectorRear View HR-J749MS HR-J449MS Display Panel J746MS Display Panel J449MS Remote Control How To Use Installing BatteriesConnect Recorder to TV Check ContentsBasic Connections Situate RecorderPin Scart Cable ot provided TV Aerial Cable Decoder DECODER-RECORDER Connection Canal PlusBack of Recorder Connection To Stereo System HR-J746MS OnlyMake Connections Television Speaker AUX in or Tape Monitor FM Tuner CD Player Stereo AmplifierSpeaker Auto channel Set/Auto Clock Set/Auto Guide Channel Set Auto Set UpPerform Auto SET UP If auto channel set has succeeded but auto clock set has not Perform Auto Channel SET Access Menu Principal ScreenTuner Set Turn on the RecorderPress Menu Return to Normal ScreenUsing Confirmation Screen Delete a Channel Select ItemDelete Channel Select NEW PositionSelect Channel to FINE-TUNE Access Manual CH. SET ScreenPerform Tuning Switch StationsTV Station And ID List Preparation Clock SetSET Just Clock PresetSET Clock Automatically SET Date and TimeGuide Channel Set SetupMake List of Stored Station Names Preset Positions Close Menu When Using a Satellite ReceiverNumber TRY Operating TV TV Multi Brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeTRY Operating Satellite Receiver Satellite Re- ceiver Multi- Brand Remote ControlSET Satellite Receiver Brand Code Playback BasicActivate FRAME-BY Frame Playback Playback FeaturesPause During Playback Override Automatic Tracking Adjust TrackingActivate HIGH-SPEED SearchPlayback Activate 3R PictureActivate Repeat Instant ReView Activate Index SearchActivate Instant Review Index SearchStop Scene Finder SET A/B Code SwitchRE-SUPPLY Power Activate Scene FinderSoundtrack Selection HR-J746MS Only Activate SpatializerSpatializer HR-J746MS only Basic Recording Recording Access Autres Reglages ScreenAccess Menu Principal S.T. Picture SystemPlayback ON-SCREEN Display ENABLE/DISABLEOn-Screen Displays SET Counter Display Recording FeaturesSelect Preset to Watch Reset CounterType of Broadcast On-screen Display Being Received Receiving Stereo And Bilin- gual Programmes HR-J746MS OnlyTo Record Nicam Stereo Bilingual Programmes HR-J746MS Only SET Recording Duration Engage ITR ModeInstant Timer Recording ITR Enter Showview Number Showview Timer RecordingAccess Timer Programming Screen Access Showview Program ScreenEngage RECORDER’S Timer ModeReturn to Normal Time Regular Timer ProgrammingAccess Programme Press Chaine + Enter Preset PositionEngage RECORDER’S Timer Mode Screen AND/OR Display Auto TimerCheck And Cancel Programmes Revise ProgrammeEngage Auto VN/LD TimerAuto VN/LD Timer Timer WarningSET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerRecorder Player PlayerYour recorder RecorderStart Camcorder Edit From a CamcorderSET RECORDER’S Input ModeTape recorded with this recorder Hi-Fi and normal audioClear Panel with Auto Timer set to a Indicator offTimer Recording Questions and Answers Band HR-J746MS/449MS