JVC HR-S7722EK, HR-S7700EK setup guide Pause During Playback, Activate HIGH-SPEED Search

NOTE:

Refer to the SHUTTLE ring illustration below as you read the following procedures.

Still

15

Variable-Speed Search

ACTIVATE VARIABLE-SPEED SEARCH

								se
							er
						v
					e			w
					R
							lo
					e	s
				s
			r
		e			y
		v
	e			a
R			p

e
s	h
r c
e	r
v a
e e
R	s

Slow motion

Pl a y

F
so
er
aw
r	a
c r
h d

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on the left).

OR

During playback, press @or #.

●The more times you press, the faster the playback picture moves.

●To decrease speed, press the button for the opposite direction.

Still Picture/Frame-By-Frame Playback

PAUSE DURING PLAYBACK

1 Press PAUSE. If there is vertical jitter, use the PR buttons to correct the picture.

ACTIVATE FRAME-BY-FRAME PLAYBACK

2 Turn the JOG dial to the right for forward frame-by- frame playback, or to the left for reverse frame-by-frame playback.

OR

Press PAUSE. Each time PAUSE is pressed the tape will advance one frame.

OR

Press @ or #. Each time one of these buttons is pressed the tape will move one frame in the direction of the arrow.

To resume normal playback, press PLAY.

Slow Motion

ACTIVATE SLOW-MOTION PLAYBACK

1 During playback or still picture, turn the SHUTTLE ring to the right for forward slow motion, or to the left for reverse slow motion (refer to the illustration above).

OR

During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.

OR

During still picture, press and hold @ or #. Release to return to still picture.

To resume normal playback, press PLAY.

To resume normal playback, press PLAY.

High-Speed (Turbo) Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search. Releasing SHUTTLE resumes still picture playback.

●For forward high-speed search, turn the SHUTTLE ring all the way to the right and release it within 1 second.

●For reverse high-speed search, turn the SHUTTLE ring all the way to the left and release it within 1 second.

OR

During playback or still picture, press FF for forward high-speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, press and hold FF or REW during playback or still picture. When released, normal playback resumes.

ATTENTION

●In the high-speed search, still, slow-motion or frame-by- frame playback mode,

●the picture will be distorted.

●noise bars will appear.

●there will be a loss of colour with a tape recorded in LP mode.

●Picture may not appear during high-speed search with a tape recorded in LP mode.

●When normal playback resumes from search, still, slow motion or frame-by-frame playback, the picture may jitter vertically momentarily depending on the type of TV being used.