JVC HR-S7700EK, HR-S7722EK setup guide Back of TV, Back of Recorder

Page 6

6

QUICKSETUPGUIDE(cont.)

STEP

2

INSTALLATION

CONNECT VIDEO RECORDER TO TV

Place the recorder on a stable, flat surface.

Back of TV

Aerial connector

21-pin AV input connector (SCART)

Mains Power

Cord

Mains outlet

RF Cable (provided)

21-pin SCART Cable (not provided)

Make this connec- tion if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.

TV Aerial Cable (not provided)

Back of Recorder

RF CONNECTION

To connect to a TV with NO 21-pin AV input connector (SCART) . . .

1– Disconnect the TV aerial cable from the TV.

2– Connect the TV aerial cable to the ANT. IN jack on the rear panel of the recorder.

3– Connect the provided RF cable between the RF OUT jack on the rear panel of the recorder and the TV’s aerial connector.

AV CONNECTION

To connect to a TV with 21-pin AV input connector (SCART) . . .

1– Connect the aerial, recorder and TV as per “RF CONNECTION”. 2– Connect an optional SCART cable between the AV1 (L-1) IN/ OUT socket on the rear panel of the recorder and the TV’s 21-

pin AV input connector (SCART).

NOTES:

●The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV's 21-pin AV input connector (SCART) is compatible with the Y/C signal, set "L-1 OUTPUT" to "S-VIDEO" after the connection and the initial settings are completed (☞ pg. 36). You can obtain high-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV's SCART connector.

●For switching the TV's mode, refer to the instruction manual of your television.

●To obtain high-quality S-VHS pictures, you can also use the S-VIDEO CONNECTION described on page 7.

ATTENTION

■Do NOT Plug the mains power cord into a mains outlet until all connections are completed.

■Do NOT press the button on the recorder or on the remote control to turn on the recorder's power before you start the Auto Set Up procedure described on page 8.

Image 6

Contents HR-S7700EK HR-S7722EK Safety Precautions Connection to the mains supply in the United Kingdom Moisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide To connect to a TV with 21-pin AV input connector Scart Back of TVBack of Recorder Mains outlet Mains Power Cord Video ConnectionRefer to With the AV or S-VIDEO connection Before performing the following procedure, make sure thatAuto for Auto Set Up function Tion pg and the TV is turned on,Progress, this process will be interrupted Or remote control until the display panelShows either the display as illustrated on You will need to start again. See Notes belowIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTurn on the Recorder TV Auto Power OnLink Functions NexTView LinkSatellite Receiver Control Setting Check Result of Test Select Satellite RECEIVER’S Channel for TestingEnter Satellite RECEIVER’S Brand Channel positionFind Programme Start Point PlaybackLoad a Cassette Start PlaybackPause During Playback Activate HIGH-SPEED SearchRecording Engage ITR Mode Select Preset to WatchReset Counter SET Counter DisplayAccess Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode NumberTimer Warning PDC RecordingTime Express Timer ProgrammingBefore performing Express Timer Programming Enter Programme DateReturn to Normal SET PDC ModeTimer Mode Engage RECORDER’SCancel or Replace a Programme Check, Cancel And Replace ProgrammesAccess Programme SCREEN/ Display Return to Timer ModeTo cancel a programme When programmes overlap each otherCancel or Change Programme Setting Confirm Overlapping ProgrammesManual Tracking Playback Picture AdjustmentDigital TBC/NR Digital 3RSoundtrack Selection Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes During PlaybackActivate Instant Review Looking For Scene You WantActivate Index Search Skip Over UnwantedRecording According To Tape Type Super VHS S-VHS VHS ET and VHSPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemRecording PlaybackOr press Record on the recorder Satellite Receiver Unit Connector TV Aerial cable Audio in connectorAutomatic Satellite Programme Recording AerialScreen Select L-2 Select ModeREC Mode Engage Auto Satellite ProgSelect Picture Control SET Mode Access Main Menu ScreenAccess Mode SET Screen Minimizing Picture Degradation While EditingMake Connections SET RECORDER’S Input ModeSET Edit Mode Start CamcorderEdit To Or From Another Video Recorder Input ModeSET Edit Mode SET Recording DECK’SRecorder Player OUTPUT/INPUT Setting SELECT/INPUT SettingEngage Audio Dubbing SET Input ModeLocate Start Point Start DubbingReset the Counter Insert EditingLocate END Point Engage Insert Editing Start EditingEND Insert Editing ENABLE/DISABLE ON-SCREEN Display Other FunctionsOn-Screen Display Power Save Mode Auto TimerNext Function Memory SET, then press OK or # Auto SP→LP TimerFor Example Then press OK or #to selectRepeat Playback Engage RECORD-PAUSE ModeResume Recording Ntsc PlaybackConnection To Stereo System Speaker Television Mains outletVideo Plus+ Setup NumberGuide Program Number Set Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelWith RF Connection Tuner Set Perform Auto Channel SETAuto Channel Set After Scan Completed Screen preset positionsProcedures Is displayed on the screenInput Channel Storing Channels ManuallySelect Band Enter NEW Channel InformationFine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastChange Station Preset Position Delete a ChannelChannel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List TV Station Channel Number Guide Clock Set Just ClockQuestions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Ejected, and ä and on Record Safety tab removed Subsidi ARY InformationIndex Front ViewRear View Display Panel Remote Control Timer Button engages timer-standby mode. pg VCR, TV PR +/-,TV +/-, TV MutingMaximum recording time DA4 Double Azimuth helical