JVC HR-S7722EK, HR-S7700EK setup guide With RF Connection

Page 47

STOP

– –:– –

1 2 3

2

4 5 6

7 8 9

4

0

PR

1 ?

3

OK

TEST SIGNAL

The channel on which the screen on the left appears clearly in step 2 is your Video Channel.

47

With RF Connection

Before performing the following procedure, make sure that:

■the mains power cord is plugged into the mains outlet.

■the video recorder is turned off and there is no cassette inserted in the recorder.

■the connected TV is turned on.

■batteries have been installed in the remote control.

ACCESS VIDEO CHANNEL

SET MODE

1 Press and hold down STOP on the recorder until the display panel shows the following.

SET VIDEO CHANNEL

2 Press PR+ or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area. Refer to list on page 54 for details of broadcast stations in your area.

(Ex.) If channel 36 is available in your area

Then set your TV to UHF channel 36. (Refer to the instructions supplied with your TV set for how to do this.)

●If the two vertical white bars appear clearly on the screen as shown in the illustration at bottom left, go to step 3.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

IMPORTANT

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

EXIT VIDEO CHANNEL SET

MODE

3 Press OK.

To view picture signals from the video recorder, set your TV to the Video Channel.

Page 46 Page 48
Image 47
Page 46 Page 48
Contents HR-S7700EK HR-S7722EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of Recorder To connect to a TV with 21-pin AV input connector ScartBack of TV Video Connection Mains outlet Mains Power CordTion pg and the TV is turned on, Before performing the following procedure, make sure thatAuto for Auto Set Up function Refer to With the AV or S-VIDEO connectionYou will need to start again. See Notes below Or remote control until the display panelShows either the display as illustrated on Progress, this process will be interruptedIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notNexTView Link TV Auto Power OnLink Functions Turn on the RecorderSatellite Receiver Control Setting Channel position Select Satellite RECEIVER’S Channel for TestingEnter Satellite RECEIVER’S Brand Check Result of TestStart Playback PlaybackLoad a Cassette Find Programme Start PointActivate HIGH-SPEED Search Pause During PlaybackRecording SET Counter Display Select Preset to WatchReset Counter Engage ITR ModeEnter Pluscode Number Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Access Video PLUS+ Program ScreenPDC Recording Timer WarningEnter Programme Date Express Timer ProgrammingBefore performing Express Timer Programming TimeEngage RECORDER’S SET PDC ModeTimer Mode Return to NormalReturn to Timer Mode Check, Cancel And Replace ProgrammesAccess Programme SCREEN/ Display Cancel or Replace a ProgrammeConfirm Overlapping Programmes When programmes overlap each otherCancel or Change Programme Setting To cancel a programmeDigital 3R Playback Picture AdjustmentDigital TBC/NR Manual TrackingDuring Playback Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes Soundtrack SelectionSkip Over Unwanted Looking For Scene You WantActivate Index Search Activate Instant ReviewSuper VHS S-VHS VHS ET and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsOr press Record on the recorder RecordingPlayback Aerial Connector TV Aerial cable Audio in connectorAutomatic Satellite Programme Recording Satellite Receiver UnitEngage Auto Satellite Prog Select L-2 Select ModeREC Mode ScreenMinimizing Picture Degradation While Editing Access Main Menu ScreenAccess Mode SET Screen Select Picture Control SET ModeStart Camcorder SET RECORDER’S Input ModeSET Edit Mode Make ConnectionsSET Recording DECK’S Input ModeSET Edit Mode Edit To Or From Another Video RecorderRecorder Player SELECT/INPUT Setting OUTPUT/INPUT SettingStart Dubbing SET Input ModeLocate Start Point Engage Audio DubbingLocate END Point Reset the CounterInsert Editing END Insert Editing Engage Insert EditingStart Editing On-Screen Display ENABLE/DISABLE ON-SCREEN DisplayOther Functions Next Function Memory Power Save ModeAuto Timer Then press OK or #to select Auto SP→LP TimerFor Example SET, then press OK or #Ntsc Playback Engage RECORD-PAUSE ModeResume Recording Repeat PlaybackSpeaker Television Mains outlet Connection To Stereo SystemGuide Program Number Set Video Plus+ SetupNumber SET Video Channel Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetWith RF Connection Auto Channel Set Tuner SetPerform Auto Channel SET Is displayed on the screen Screen preset positionsProcedures After Scan CompletedEnter NEW Channel Information Storing Channels ManuallySelect Band Input ChannelDelete a Channel When Receiving a Scrambled BroadcastChange Station Preset Position Fine-Tuning Channels Already StoredSelect NEW Station Access ManualSwitch Stations Channel SET ScreenTV Station And ID List TV Station Channel Number Guide Just Clock Clock SetWhat happens if the tape runs out during recording? Questions And AnswersÄ remain lit on the display panel. Is there Problem? Troubleshooting Subsidi ARY Information Ejected, and ä and on Record Safety tab removedFront View IndexRear View Display Panel Remote Control VCR, TV PR +/-,TV +/-, TV Muting Timer Button engages timer-standby mode. pgDA4 Double Azimuth helical Maximum recording time

HR-S7722EK, HR-S7700EK specifications

The JVC HR-S7700EK and HR-S7722EK are standout models in JVC’s VCR lineup, renowned for their impressive performance and advanced technology designed to enhance video playback quality. These S-VHS VCRs have gained a loyal following among both casual viewers and videophiles looking to enjoy superior picture clarity and fidelity.

One of the most significant features of both models is their support for S-VHS recordings, which offer improvements over standard VHS by providing higher resolution and enhanced color reproduction. This technology enables users to capture and playback videos with remarkable sharpness and detail, making these VCRs ideal for preserving precious memories or enjoying old tapes.

The JVC HR-S7700EK and HR-S7722EK are equipped with the JVC's Super VHS ET (Extended Technology), allowing users to play VHS tapes with S-VHS quality enhancements. This capability ensures that even standard VHS recordings benefit from improved playback quality, making it an excellent choice for those with existing VHS libraries.

Both models shine with their TBC (Time Base Corrector) technology, which stabilizes and cleans the video signal, reducing jitter and improving overall playback performance. This feature is particularly useful when playing older, damaged tapes, making the viewing experience smoother and more enjoyable.

The JVC HR-S7722EK takes it a step further with its advanced features such as digital noise reduction and various playback options, ensuring that users can enjoy an optimized viewing experience tailored to their preferences. With multiple recording speeds, including SP and LP modes, users can choose their desired balance between picture quality and recording time.

An intuitive user interface allows for straightforward navigation, making it easy for users to program recordings or adjust settings. The models also come with features like a child lock and an on-screen display, enhancing the user-friendly experience.

The build quality of the JVC HR-S7700EK and HR-S7722EK is solid, ensuring durability and reliability. Many users appreciate the sleek design, which fits seamlessly into most home entertainment setups. These models remain a favorite for those looking to preserve VHS content with optimal quality, thanks to their advanced technologies and thoughtful features that cater to the needs of users across various demographics.
Top Page Image Contents