JVC HR-S7722EK setup guide SET Input Mode, Locate Start Point, Engage Audio Dubbing, Start Dubbing

Page 37

Audio Dubbing

37

Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack.

PLAY

STOP

PAUSE

Normal audio track

Video/Hi-Fi audio track

Pre-recorded tape

Audio-dubbed tape

PR

A

 

.

 

DUB

CD Player, etc.

 

CD Player, etc.

Mixer

Audio mixer

output

 

 

Original sound

 

AUDIO OUT

NOTES:

●When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the mixed sound (Hi-Fi + Normal soundtracks), press

AUDIO on the remote control to select " + (L+R) + NORM" (☞ pg. 25).

●Audio dubbing stops automatically when the counter reaches "0:00:00", and the recorder enters the Play mode. Check the counter reading before dubbing.

●Audio dubbing is also possible using the rear panel AV1 (L-1) IN/ OUT or AV2 (L-2) IN/DECODER connector. When using these connectors, make sure to select the correct input mode in step 2.

●Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.

●When playing back an audio-dubbed tape, press AUDIO on the remote control to select the soundtrack you wish to hear

(☞ pg. 25).

MAKE CONNECTIONS

1 Connect an audio component to the AUDIO L + R connectors on the recorder's front panel.

●When connecting monaural equipment, use only the recorder's AUDIO L connector.

 

SET INPUT MODE

 

Press AUX and/or PR so that "F-1" or "S-1" appears in

2 place of a channel number.

 

LOCATE START POINT

 

Press PLAY to start playback of the tape in your

 

recorder, and press PAUSE when you find the point

3 where you want to start dubbing.

4

ENGAGE AUDIO DUBBING

Press A. DUB.

 

● It is possible to take the original sound recorded on

the tape in your recorder and mix it with other

 

sounds from a microphone, CD player etc. To

 

perform this audio dubbing with audio mixing,

 

connect as in the diagram on the left.

 

● Your recorder enters the Audio Dubbing Pause mode.

 

(" " blinks, " " and " " light up on the front display

 

panel.)

 

● To perform audio dubbing with audio mixing, press

 

AUDIO on the remote control to select " + (L+R)"

 

at this point.

 

* Audio dubbing with audio mixing is not possible if

 

you're using a monaural audio component, or if

 

you don't have an audio mixer.

 

 

 

START DUBBING

 

Engage the audio component's Play mode, then press

 

PLAY to start the tape in your recorder. Audio dubbing

5 begins at this point.

●"" blinks and "" is displayed on the front display panel.

●To stop dubbing temporarily, press PAUSE. Press PLAY to resume dubbing.

END AUDIO DUBBING

6 Press STOP to stop the tape in your recorder, and engage the audio component's Stop mode.

Page 36 Page 38
Image 37
Page 36 Page 38
Contents HR-S7700EK HR-S7722EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV To connect to a TV with 21-pin AV input connector ScartBack of Recorder Video Connection Mains outlet Mains Power CordAuto for Auto Set Up function Before performing the following procedure, make sure thatRefer to With the AV or S-VIDEO connection Tion pg and the TV is turned on,Shows either the display as illustrated on Or remote control until the display panelProgress, this process will be interrupted You will need to start again. See Notes belowIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notLink Functions TV Auto Power OnTurn on the Recorder NexTView LinkSatellite Receiver Control Setting Enter Satellite RECEIVER’S Brand Select Satellite RECEIVER’S Channel for TestingCheck Result of Test Channel positionLoad a Cassette PlaybackFind Programme Start Point Start PlaybackActivate HIGH-SPEED Search Pause During PlaybackRecording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayAccess Video PLUS+ Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Program Screen Enter Pluscode NumberPDC Recording Timer WarningBefore performing Express Timer Programming Express Timer ProgrammingTime Enter Programme DateTimer Mode SET PDC ModeReturn to Normal Engage RECORDER’SAccess Programme SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeCancel or Change Programme Setting When programmes overlap each otherTo cancel a programme Confirm Overlapping ProgrammesDigital TBC/NR Playback Picture AdjustmentManual Tracking Digital 3RReceiving Nicam Stereo And Bilingual Programmes Selecting Sound You WantSoundtrack Selection During PlaybackActivate Index Search Looking For Scene You WantActivate Instant Review Skip Over UnwantedSuper VHS S-VHS VHS ET and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsPlayback RecordingOr press Record on the recorder Automatic Satellite Programme Recording Connector TV Aerial cable Audio in connectorSatellite Receiver Unit AerialREC Mode Select L-2 Select ModeScreen Engage Auto Satellite ProgAccess Mode SET Screen Access Main Menu ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingSET Edit Mode SET RECORDER’S Input ModeMake Connections Start Camcorder SET Edit Mode Input Mode Edit To Or From Another Video Recorder SET Recording DECK’SRecorder Player SELECT/INPUT Setting OUTPUT/INPUT SettingLocate Start Point SET Input ModeEngage Audio Dubbing Start DubbingInsert Editing Reset the CounterLocate END Point Start Editing Engage Insert EditingEND Insert Editing Other Functions ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Display Auto Timer Power Save ModeNext Function Memory For Example Auto SP→LP TimerSET, then press OK or # Then press OK or #to selectResume Recording Engage RECORD-PAUSE ModeRepeat Playback Ntsc PlaybackSpeaker Television Mains outlet Connection To Stereo SystemNumber Video Plus+ SetupGuide Program Number Set Exit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Perform Auto Channel SET Tuner SetAuto Channel Set Procedures Screen preset positionsAfter Scan Completed Is displayed on the screenSelect Band Storing Channels ManuallyInput Channel Enter NEW Channel InformationChange Station Preset Position When Receiving a Scrambled BroadcastFine-Tuning Channels Already Stored Delete a ChannelSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide Just Clock Clock SetÄ remain lit on the display panel. Is there Problem? Questions And AnswersWhat happens if the tape runs out during recording? Troubleshooting Subsidi ARY Information Ejected, and ä and on Record Safety tab removedFront View IndexRear View Display Panel Remote Control VCR, TV PR +/-,TV +/-, TV Muting Timer Button engages timer-standby mode. pgDA4 Double Azimuth helical Maximum recording time
Top Page Image Contents