JVC HR-S7722EK, HR-S7700EK setup guide Recording, Playback, Or press Record on the recorder

Page 29

Recording

1

START RECORDING

Press and hold RECORD and press PLAY on the remote,

or press RECORD on the recorder.

 

DURING B.E.S.T.

 

 

 

 

B.E.S.T. COMPLETE

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

NOTES:

●The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●The B.E.S.T. system does not work while Auto Satellite Prog recording is in progress (☞ pg. 30).

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

●Pressing the recorder's RECORD button while "BEST" is displayed does not start Instant Timer Recording (☞ pg. 17).

ATTENTION

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and press RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY when you are ready to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 28.

29

Playback

The recorder assesses the quality of the tape once you initiate playback.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.

NOTES:

●When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 1 through 5 on page 28.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents HR-S7700EK HR-S7722EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of Recorder To connect to a TV with 21-pin AV input connector ScartBack of TV Video Connection Mains outlet Mains Power CordAuto for Auto Set Up function Before performing the following procedure, make sure thatRefer to With the AV or S-VIDEO connection Tion pg and the TV is turned on,Shows either the display as illustrated on Or remote control until the display panelProgress, this process will be interrupted You will need to start again. See Notes belowIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notLink Functions TV Auto Power OnTurn on the Recorder NexTView LinkSatellite Receiver Control Setting Enter Satellite RECEIVER’S Brand Select Satellite RECEIVER’S Channel for TestingCheck Result of Test Channel positionLoad a Cassette PlaybackFind Programme Start Point Start PlaybackActivate HIGH-SPEED Search Pause During PlaybackRecording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayAccess Video PLUS+ Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Program Screen Enter Pluscode NumberPDC Recording Timer WarningBefore performing Express Timer Programming Express Timer ProgrammingTime Enter Programme DateTimer Mode SET PDC ModeReturn to Normal Engage RECORDER’SAccess Programme SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeCancel or Change Programme Setting When programmes overlap each otherTo cancel a programme Confirm Overlapping ProgrammesDigital TBC/NR Playback Picture AdjustmentManual Tracking Digital 3RReceiving Nicam Stereo And Bilingual Programmes Selecting Sound You WantSoundtrack Selection During PlaybackActivate Index Search Looking For Scene You WantActivate Instant Review Skip Over UnwantedSuper VHS S-VHS VHS ET and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsOr press Record on the recorder RecordingPlayback Automatic Satellite Programme Recording Connector TV Aerial cable Audio in connectorSatellite Receiver Unit AerialREC Mode Select L-2 Select ModeScreen Engage Auto Satellite ProgAccess Mode SET Screen Access Main Menu ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingSET Edit Mode SET RECORDER’S Input ModeMake Connections Start CamcorderSET Edit Mode Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder Player SELECT/INPUT Setting OUTPUT/INPUT SettingLocate Start Point SET Input ModeEngage Audio Dubbing Start DubbingLocate END Point Reset the CounterInsert Editing END Insert Editing Engage Insert EditingStart Editing On-Screen Display ENABLE/DISABLE ON-SCREEN DisplayOther Functions Next Function Memory Power Save ModeAuto Timer For Example Auto SP→LP TimerSET, then press OK or # Then press OK or #to selectResume Recording Engage RECORD-PAUSE ModeRepeat Playback Ntsc PlaybackSpeaker Television Mains outlet Connection To Stereo SystemGuide Program Number Set Video Plus+ SetupNumber Exit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Auto Channel Set Tuner SetPerform Auto Channel SET Procedures Screen preset positionsAfter Scan Completed Is displayed on the screenSelect Band Storing Channels ManuallyInput Channel Enter NEW Channel InformationChange Station Preset Position When Receiving a Scrambled BroadcastFine-Tuning Channels Already Stored Delete a ChannelSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide Just Clock Clock SetWhat happens if the tape runs out during recording? Questions And AnswersÄ remain lit on the display panel. Is there Problem? Troubleshooting Subsidi ARY Information Ejected, and ä and on Record Safety tab removedFront View IndexRear View Display Panel Remote Control VCR, TV PR +/-,TV +/-, TV Muting Timer Button engages timer-standby mode. pgDA4 Double Azimuth helical Maximum recording time

HR-S7722EK, HR-S7700EK specifications

The JVC HR-S7700EK and HR-S7722EK are standout models in JVC’s VCR lineup, renowned for their impressive performance and advanced technology designed to enhance video playback quality. These S-VHS VCRs have gained a loyal following among both casual viewers and videophiles looking to enjoy superior picture clarity and fidelity.

One of the most significant features of both models is their support for S-VHS recordings, which offer improvements over standard VHS by providing higher resolution and enhanced color reproduction. This technology enables users to capture and playback videos with remarkable sharpness and detail, making these VCRs ideal for preserving precious memories or enjoying old tapes.

The JVC HR-S7700EK and HR-S7722EK are equipped with the JVC's Super VHS ET (Extended Technology), allowing users to play VHS tapes with S-VHS quality enhancements. This capability ensures that even standard VHS recordings benefit from improved playback quality, making it an excellent choice for those with existing VHS libraries.

Both models shine with their TBC (Time Base Corrector) technology, which stabilizes and cleans the video signal, reducing jitter and improving overall playback performance. This feature is particularly useful when playing older, damaged tapes, making the viewing experience smoother and more enjoyable.

The JVC HR-S7722EK takes it a step further with its advanced features such as digital noise reduction and various playback options, ensuring that users can enjoy an optimized viewing experience tailored to their preferences. With multiple recording speeds, including SP and LP modes, users can choose their desired balance between picture quality and recording time.

An intuitive user interface allows for straightforward navigation, making it easy for users to program recordings or adjust settings. The models also come with features like a child lock and an on-screen display, enhancing the user-friendly experience.

The build quality of the JVC HR-S7700EK and HR-S7722EK is solid, ensuring durability and reliability. Many users appreciate the sleek design, which fits seamlessly into most home entertainment setups. These models remain a favorite for those looking to preserve VHS content with optimal quality, thanks to their advanced technologies and thoughtful features that cater to the needs of users across various demographics.
Top Page Image Contents