JVC HR-S7722EK, HR-S7700EK setup guide Or remote control until the display panel

Page 9

9

PRESET DOWNLOAD

SET THE TUNER CHANNELS BY DOWNLOADING FROM YOUR TV, CLOCK AND GUIDE PROGRAM NUMBERS

When you connect the recorder and your TV via fully-wired 21-pin SCART cable (☞ pg. 6), you can set the recorder's tuner channels by downloading preset data from your TV instead of using the Auto Set Up function (☞ pg. 8). After downloading is completed, the recorder sets the clock and the VIDEO Plus+ assigned Guide Program numbers automatically.

For details, refer to the instruction manual for your TV.

ATTENTION

You can use this function only with a TV offering T-V Link, etc.*

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

Before performing the following procedure, make sure that:

■the TV aerial cable is connected to the recorder and a 21-pin SCART cable is connected between your TV and the recorder.

■the mains power cord is plugged into the mains outlet.

■batteries have been installed in the remote control.

 

 

1

Press

. If "Auto" appears on the display

 

 

 

 

panel, Press %Þ to select "CH – –" and

 

 

 

 

press OK or #. Preset position on the

 

 

 

 

display panel increases from "CH1";

 

 

 

 

do NOT press any button on the recorder

T-V LINK

 

 

 

or remote control until the display panel

 

 

 

 

 

 

 

shows either the display as illustrated on

PLEASE WAIT

 

 

 

page 8 or "– – :– –".

 

 

 

 

● If "– –:– –" appears on the display panel, refer

 

 

 

 

to page 10.

 

 

 

 

● If you are using the on-screen display, the T-V

 

 

 

 

LINK screen will appear. Then the GUIDE

[MENU] : EXIT

 

 

– –:– –

PROG SET screen will appear during Guide

 

 

 

 

Program number set.

 

1

2

3

● If you press any button on the recorder or

 

 

 

2

remote control while downloading is in

 

4

5

6

GUIDE PROG SET

7

8

9

progress, this process will be interrupted and

you will need to start again. See NOTES below.

PLEASE WAIT

 

 

4

 

0

 

 

 

 

1

?

 

 

 

[MENU] : EXIT

 

 

2

Press

to turn off the recorder. Press

 

 

 

 

and hold down STOP on the recorder

 

 

 

 

until the display panel shows the display

 

 

 

 

as illustrated on the right. Press PR – until

 

 

 

 

the display panel shows "_OUT– –" to set

 

 

 

 

the Video Channel to off.

 

3

Press OK to exit Video Channel Set mode.

To view picture signals from the video recorder, set your TV to its AV mode.

— Refer to the instructions supplied with your TV set for how to do this.

NOTES:

●In areas where no TV station transmits the PDC signal, the recorder cannot perform either auto clock set or auto Guide Program number set.

●If there is a power cut, or if you press or MENU while downloading or set up is in progress, it will be interrupted; be sure to turn off the recorder power once and try again from the beginning.

●Auto clock may not function properly depending on reception conditions.

●When you perform Preset Download, be sure to use fully-wired 21-pin SCART cable.

●On this recorder, the characters available for station names (ID) are A–Z, 0–9, –, *, + and (space). The names of some downloaded stations may differ from those on your TV (☞ pg. 52).

Page 8 Page 10
Image 9
Page 8 Page 10
Contents HR-S7700EK HR-S7722EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide To connect to a TV with 21-pin AV input connector Scart Back of TVBack of Recorder Video Connection Mains outlet Mains Power CordAuto for Auto Set Up function Before performing the following procedure, make sure thatRefer to With the AV or S-VIDEO connection Tion pg and the TV is turned on,Shows either the display as illustrated on Or remote control until the display panelProgress, this process will be interrupted You will need to start again. See Notes belowIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notLink Functions TV Auto Power OnTurn on the Recorder NexTView LinkSatellite Receiver Control Setting Enter Satellite RECEIVER’S Brand Select Satellite RECEIVER’S Channel for TestingCheck Result of Test Channel positionLoad a Cassette PlaybackFind Programme Start Point Start PlaybackActivate HIGH-SPEED Search Pause During PlaybackRecording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayAccess Video PLUS+ Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Program Screen Enter Pluscode NumberPDC Recording Timer WarningBefore performing Express Timer Programming Express Timer ProgrammingTime Enter Programme DateTimer Mode SET PDC ModeReturn to Normal Engage RECORDER’SAccess Programme SCREEN/ Display Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Timer ModeCancel or Change Programme Setting When programmes overlap each otherTo cancel a programme Confirm Overlapping ProgrammesDigital TBC/NR Playback Picture AdjustmentManual Tracking Digital 3RReceiving Nicam Stereo And Bilingual Programmes Selecting Sound You WantSoundtrack Selection During PlaybackActivate Index Search Looking For Scene You WantActivate Instant Review Skip Over UnwantedSuper VHS S-VHS VHS ET and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsRecording PlaybackOr press Record on the recorder Automatic Satellite Programme Recording Connector TV Aerial cable Audio in connectorSatellite Receiver Unit AerialREC Mode Select L-2 Select ModeScreen Engage Auto Satellite ProgAccess Mode SET Screen Access Main Menu ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingSET Edit Mode SET RECORDER’S Input ModeMake Connections Start CamcorderSET Edit Mode Input ModeEdit To Or From Another Video Recorder SET Recording DECK’SRecorder Player SELECT/INPUT Setting OUTPUT/INPUT SettingLocate Start Point SET Input ModeEngage Audio Dubbing Start DubbingReset the Counter Insert EditingLocate END Point Engage Insert Editing Start EditingEND Insert Editing ENABLE/DISABLE ON-SCREEN Display Other FunctionsOn-Screen Display Power Save Mode Auto TimerNext Function Memory For Example Auto SP→LP TimerSET, then press OK or # Then press OK or #to selectResume Recording Engage RECORD-PAUSE ModeRepeat Playback Ntsc PlaybackSpeaker Television Mains outlet Connection To Stereo SystemVideo Plus+ Setup NumberGuide Program Number Set Exit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Tuner Set Perform Auto Channel SETAuto Channel Set Procedures Screen preset positionsAfter Scan Completed Is displayed on the screenSelect Band Storing Channels ManuallyInput Channel Enter NEW Channel InformationChange Station Preset Position When Receiving a Scrambled BroadcastFine-Tuning Channels Already Stored Delete a ChannelSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide Just Clock Clock SetQuestions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Subsidi ARY Information Ejected, and ä and on Record Safety tab removedFront View IndexRear View Display Panel Remote Control VCR, TV PR +/-,TV +/-, TV Muting Timer Button engages timer-standby mode. pgDA4 Double Azimuth helical Maximum recording time

HR-S7722EK, HR-S7700EK specifications

The JVC HR-S7700EK and HR-S7722EK are standout models in JVC’s VCR lineup, renowned for their impressive performance and advanced technology designed to enhance video playback quality. These S-VHS VCRs have gained a loyal following among both casual viewers and videophiles looking to enjoy superior picture clarity and fidelity.

One of the most significant features of both models is their support for S-VHS recordings, which offer improvements over standard VHS by providing higher resolution and enhanced color reproduction. This technology enables users to capture and playback videos with remarkable sharpness and detail, making these VCRs ideal for preserving precious memories or enjoying old tapes.

The JVC HR-S7700EK and HR-S7722EK are equipped with the JVC's Super VHS ET (Extended Technology), allowing users to play VHS tapes with S-VHS quality enhancements. This capability ensures that even standard VHS recordings benefit from improved playback quality, making it an excellent choice for those with existing VHS libraries.

Both models shine with their TBC (Time Base Corrector) technology, which stabilizes and cleans the video signal, reducing jitter and improving overall playback performance. This feature is particularly useful when playing older, damaged tapes, making the viewing experience smoother and more enjoyable.

The JVC HR-S7722EK takes it a step further with its advanced features such as digital noise reduction and various playback options, ensuring that users can enjoy an optimized viewing experience tailored to their preferences. With multiple recording speeds, including SP and LP modes, users can choose their desired balance between picture quality and recording time.

An intuitive user interface allows for straightforward navigation, making it easy for users to program recordings or adjust settings. The models also come with features like a child lock and an on-screen display, enhancing the user-friendly experience.

The build quality of the JVC HR-S7700EK and HR-S7722EK is solid, ensuring durability and reliability. Many users appreciate the sleek design, which fits seamlessly into most home entertainment setups. These models remain a favorite for those looking to preserve VHS content with optimal quality, thanks to their advanced technologies and thoughtful features that cater to the needs of users across various demographics.
Top Page Image Contents