JVC HR-S7722EK Engage RECORD-PAUSE Mode, Resume Recording, Repeat Playback, Ntsc Playback, Retake

Page 43

Repeat Playback

Your video recorder can automatically play back the whole tape 100 times repeatedly.

1

 

START PLAYBACK

 

Press PLAY.

2

 

ACTIVATE REPEAT PLAYBACK

 

Press PLAY and hold for over 5 seconds, then release.

 

 

 

The Play indicator ( ) on the display panel blinks

 

slowly.

 

 

The tape plays 100 times automatically, and then

 

 

stops.

 

 

 

3

 

STOP PLAYBACK

 

Press STOP at any time to stop playback.

 

 

 

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.

1

 

LOAD A CASSETTE

 

Insert a cassette recorded in NTSC.

2

 

START PLAYBACK

 

Press PLAY.

 

 

 

"NTSCPAL" appears on the screen for about 5

 

seconds.

 

 

Some TVs shrink the picture vertically and place

 

 

black bars at the top and bottom of the screen. This is

 

 

not a malfunction on the part of either the video

 

 

recorder or the TV.

 

 

The picture may roll up and down. This can be

 

 

corrected using the V-HOLD control found on some

 

 

TVs. (This cannot be corrected if the TV does not

 

 

have a V-HOLD control.)

 

 

The counter and tape remaining time readings will be

 

 

incorrect.

 

 

During search, still, or frame-by-frame playback, the

 

 

picture will be distorted, and there may be a loss of

 

 

colour.

 

 

Depending on the type of TV, the top and bottom

 

 

portions of superimposed displays may be cut off

 

 

during NTSC playback.

 

 

 

43

Retake

You can cut out unnecessary parts of a TV programme while you're recording it.

End of programme

Beginning of programme

 

 

 

 

 

 

 

 

Programme

Unnecessary

Unnecessary

Programme

 

part

part

 

 

 

 

 

Recorded part

Go back to end of programme to cut out unnecessary part

ENGAGE RECORD-PAUSE

MODE

1 Press PAUSE during recording.

LOCATE START POINT

2 Turn the JOG dial to the left or right (or hold down REW or FF) and release it when you reach the point where you want to resume recording.

* Your recorder returns to the Record-Pause mode.

RESUME RECORDING

3 Press PLAY when you wish to resume recording.

NOTE:

Retake function does not work during Direct Rec (pg. 11).

Image 43
Contents HR-S7700EK HR-S7722EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV To connect to a TV with 21-pin AV input connector ScartBack of Recorder Video Connection Mains outlet Mains Power CordTion pg and the TV is turned on, Before performing the following procedure, make sure thatAuto for Auto Set Up function Refer to With the AV or S-VIDEO connectionYou will need to start again. See Notes below Or remote control until the display panelShows either the display as illustrated on Progress, this process will be interruptedIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notNexTView Link TV Auto Power OnLink Functions Turn on the RecorderSatellite Receiver Control Setting Channel position Select Satellite RECEIVER’S Channel for TestingEnter Satellite RECEIVER’S Brand Check Result of TestStart Playback PlaybackLoad a Cassette Find Programme Start PointActivate HIGH-SPEED Search Pause During PlaybackRecording SET Counter Display Select Preset to WatchReset Counter Engage ITR ModeEnter Pluscode Number Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Access Video PLUS+ Program ScreenPDC Recording Timer WarningEnter Programme Date Express Timer ProgrammingBefore performing Express Timer Programming TimeEngage RECORDER’S SET PDC ModeTimer Mode Return to NormalReturn to Timer Mode Check, Cancel And Replace ProgrammesAccess Programme SCREEN/ Display Cancel or Replace a ProgrammeConfirm Overlapping Programmes When programmes overlap each otherCancel or Change Programme Setting To cancel a programmeDigital 3R Playback Picture AdjustmentDigital TBC/NR Manual TrackingDuring Playback Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes Soundtrack SelectionSkip Over Unwanted Looking For Scene You WantActivate Index Search Activate Instant ReviewSuper VHS S-VHS VHS ET and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsPlayback RecordingOr press Record on the recorder Aerial Connector TV Aerial cable Audio in connectorAutomatic Satellite Programme Recording Satellite Receiver UnitEngage Auto Satellite Prog Select L-2 Select ModeREC Mode ScreenMinimizing Picture Degradation While Editing Access Main Menu ScreenAccess Mode SET Screen Select Picture Control SET ModeStart Camcorder SET RECORDER’S Input ModeSET Edit Mode Make ConnectionsSET Recording DECK’S Input ModeSET Edit Mode Edit To Or From Another Video RecorderRecorder Player SELECT/INPUT Setting OUTPUT/INPUT SettingStart Dubbing SET Input ModeLocate Start Point Engage Audio DubbingInsert Editing Reset the CounterLocate END Point Start Editing Engage Insert EditingEND Insert Editing Other Functions ENABLE/DISABLE ON-SCREEN Display On-Screen Display Auto Timer Power Save ModeNext Function Memory Then press OK or #to select Auto SP→LP TimerFor Example SET, then press OK or #Ntsc Playback Engage RECORD-PAUSE ModeResume Recording Repeat PlaybackSpeaker Television Mains outlet Connection To Stereo SystemNumber Video Plus+ SetupGuide Program Number Set SET Video Channel Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetWith RF Connection Perform Auto Channel SET Tuner SetAuto Channel Set Is displayed on the screen Screen preset positionsProcedures After Scan CompletedEnter NEW Channel Information Storing Channels ManuallySelect Band Input ChannelDelete a Channel When Receiving a Scrambled BroadcastChange Station Preset Position Fine-Tuning Channels Already StoredSelect NEW Station Access ManualSwitch Stations Channel SET ScreenTV Station And ID List TV Station Channel Number Guide Just Clock Clock SetÄ remain lit on the display panel. Is there Problem? Questions And AnswersWhat happens if the tape runs out during recording? Troubleshooting Subsidi ARY Information Ejected, and ä and on Record Safety tab removedFront View IndexRear View Display Panel Remote Control VCR, TV PR +/-,TV +/-, TV Muting Timer Button engages timer-standby mode. pgDA4 Double Azimuth helical Maximum recording time