26 EN | TIMER RECORDING |
SHOWVIEW® Timer Programming
Before performing the SHOWVIEW Timer
Programming:
●Make sure that the recorder’s
●Insert a cassette with the safety tab in place. The recorder will come on automatically.
●Turn on the TV and select the video channel (or AV mode).
You can use the
A Access the SHOWVIEW screen.
Press PROG.
The front display panel looks like this:
B Enter the SHOWVIEW number.
Press the number keys to enter the SHOWVIEW number of a programme you wish to record. Then press OK.
●If you make a mistake, press & and input the correct number.
The SHOWVIEW number you enter appears on the front display panel with only a
C Access the SHOWVIEW Program screen.
The SHOWVIEW Program screen appears (if you’re just starting out, “P1” appears).
The front display panel shows the programme start time. Pressing
"changes the display to the programme stop time, then the date and channel position.
IMPORTANT
Make sure the channel position number you wish to record is displayed; if not, see “SHOWVIEW® System Setup” on page 51 and set the Guide Program number correctly.
●If the number you entered is invalid, “ERROR” appears on the TV screen and “Err” appears on the front display panel. Press &and input a valid SHOWVIEW number.
●If the “GUIDE PROG SET” screen appears, see “ATTENTION” on page 27.