JVC HR-S6852EU, HR-S6850EU, HR-S6851EU specifications Navigation, 34 EN

Page 34

34 EN

PROGRAMME NAVIGATION

Navigation

When you record a TV programme with this recorder, the recorder automatically stores in its memory the recording date, start time and station name. You can store these information for up to 8 programmes on one cassette. At maximum, information for 10 tapes can be stored. You can also enter the programme title when performing “SHOWVIEW® Timer Programming”

(pg. 26) or “Express Timer Programming” (pg. 28). It is possible to store these information only when “PROG. NAVIGATION” is set to “ON” (default setting) (pg. 48).

When inserting a cassette with the record safety tab

intact ...

The recorder checks the tape information for the Programme Navigation.

If the recorder can store the information for 3 or less tapes, “REMAIN[ _]” also appears on the TV screen.

If the recorder has already stored the information for 10 tapes, “MEMORY FULL” appears.

If you perform new recording, the oldest tape information will be deleted from the recorder’s memory.

If the recorder cannot detect the tape information, “NO TAPE DATA DETECTED” appears.

You cannot use Programme

Navigation.

NOTE:

If you press any button while “CHECKING TAPE DATA” appears on the TV screen, the operation is canceled.

When inserting a cassette whose record safety tab

has been removed ...

Turn on the TV and select the video channel (or AV mode).

Playback begins automatically.

You can use Navigation Playback (pg. 35), but you cannot edit programme title or delete tape data (pg. 36, 37).

Image 34
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewRear View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsTurn on the recorder Auto Set Up10 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 14 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 ENNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec Basic Playback 18 ENPause during playback Slow MotionHigh-Speed Turbo Search Activate frame-by-frame playbackIndex Search 20 ENVariable Speed Search Skip SearchManual Tracking Next Function MemoryRepeat Playback Soundtrack Selection22 EN Instant Timer Recording ITR Tape Remaining TimeSuper VHS ET S-VHS ET Engage the S-VHS ET mode24 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 26 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 28 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+30 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelReturn to the timer mode Cancel or change a programmeDisengage the timer mode Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode Before performing the following stepsNavigation 34 ENLoad a recorded cassette Navigation PlaybackProgramme Navigation Screen Select a programmeEdit Programme Title 36 ENSelect the programme Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsEdit From a Camcorder 38 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerOutput/Input Set Select and L-2 Input Setting Decoder connectorConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode44 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingDisengaged when the recorder is powered back on When viewing overplayedWhen this function is set to ON, the timer is automatically System to on or OFF  pg48 EN On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode Function  pg , set PROG. Navigation to OFFWhen this function is set to ON, you can automatically When this function is set to ON, you can reducePower consumption while the recorder is turned off Correct vertical vibration in the picture when playing back50 EN About Ntsc PlaybackGuide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program number52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 56 ENSet Stations B TV Station And ID List Station NameClock Set Access the Clock Set screen58 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 60 ENPower 62 EN RecordingOther Problems 64 EN PlaybackScan system Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Lines VHS66 EN Memo International telephone Language code Country code