JVC HR-S6851EU System to on or OFF  pg, Picture System, Minimizes picture, With lots of flat

Page 47

 

 

EN 47

 

 

* The default setting is bold in the table below.

 

 

 

8 B.E.S.T.

 

You can set the B.E.S.T. (Biconditional Equalised Signal Tracking)

ON

 

system to “ON” or “OFF” ( pg. 25).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture quality

AUTO:

Provides the optimised

according to your preference. Normally select “AUTO”.

 

picture benefits of the B.E.S.T.

NOTES:

 

Picture System.

EDIT:

Minimizes picture

When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not

 

degradation during editing

change until you select another mode.

 

When you select “EDIT” to dub tapes, be sure to select “AUTO” after you

 

(recording and playback).

SOFT:

finish dubbing the tapes.

Reduces image coarseness

When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically

 

when viewing overplayed

 

from “AUTO” to “NORM”.

SHARP:

tapes containing a lot of noise.

 

Clearer, sharper-edged

 

 

picture when viewing images

 

 

with lots of flat,

 

 

same-coloured surfaces such

 

 

as cartoons.

 

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is automatically

ON

 

engaged when the recorder power is turned off, and automatically

OFF

 

disengaged when the recorder is powered back on.

 

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions

 

 

are disabled while the Timer mode is engaged. To disengage the timer, press

 

 

# (TIMER).

 

 

 

8 O.S.D.

 

When this function is set to “ON”, various operational indicators

ON

 

appear on the TV screen. Messages appear in the selected language

OFF

 

( pg. 13, 14).

 

 

NOTES:

 

 

When you use this recorder as the source player for editing, be sure to set

 

 

“O.S.D.” to “OFF” before starting.

 

 

During playback, the operation mode indicators may be disturbed

 

 

depending on the type of tape being used.

 

 

 

Image 47
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVSelect your country Auto Set Up10 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download12 EN Set the video channelJust Clock Language for the on-screen display14 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller16 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 18 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 20 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking22 EN Tape Remaining Time Instant Timer Recording ITRReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode24 EN Super VHS ET S-VHS ETRecording Playback26 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode28 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 30 ENAccess the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyBefore performing the following steps Select the L-2 Select modeRecording mode Programme Recording34 EN NavigationSelect a programme Navigation PlaybackProgramme Navigation Screen Load a recorded cassetteSelect the programme 36 ENEdit Programme Title Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data38 EN Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersOutput/Input Set Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode44 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeSystem to on or OFF  pg When viewing overplayedWhen this function is set to ON, the timer is automatically Disengaged when the recorder is powered back onFunction  pg , set PROG. Navigation to OFF On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 48 ENCorrect vertical vibration in the picture when playing back When this function is set to ON, you can reducePower consumption while the recorder is turned off When this function is set to ON, you can automaticallyAbout Ntsc Playback 50 ENEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program NumberAuto Channel Set Access the Auto Channel Set screenTuner Set 52 ENPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 56 ENSet Stations a Station Name TV Station And ID List58 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data60 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 62 ENOther Problems Playback 64 ENLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Scan system66 EN Memo Country code International telephone Language code