JVC HR-S7600AM Remote Control Functions, Remove Power Supply, SET Remote Control Code

Page 36

36ENSPECIALFEATURES

Remote

Control

Functions

VCR

NUMBER "1"	1		2	3
NUMBER "1"
	4		5	6
	7	"2"	8	9
	NUMBER		0
			0

1

STOP

3

2

4

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and the other set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL

CODE

2 While holding down VCR on the remote control, press the NUMBER key "2" and then press STOP.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN ON THE RECORDER

4 Press on the remote control. The recorder will now only respond to B code signals.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing the NUMBER key "1" instead of "2" in step 2.

Image 36

Contents HR-S7600AM Safety Precautions Moisture Condensation Check Contents Basic ConnectionsSituate Recorder MainsVideo Connection Connect Recorder to TVConnect Recorder to Mains Access Video Channel SET Mode Video Channel SetSelect TV System With RF ConnectionSET Video Channel Finish Video Channel SETFinish Video Channel SETAuto Set Up Select LanguageSET Date SET YearDuring Auto Set Up Start Auto Channel SETMajor Countries TV System Press OK or Push JOG ÞOn-Screen Displays Access Initial SET Screen Select LanguageAccess Clock SET Screen Clock SetSET Time Start Clock OperationBasic Playback Load a CassettePoint Start PlaybackPlayback Features PlaybackStill Picture/Frame-By-Frame Playback Slow MotionAdjust Tracking Manually Activate HIGH-SPEED SearchSkip Over Unwanted SectionsAccess Main Menu Activate Digital TBC/NRDigital 3R Digital TBC/NRTape Position Indicator Instant ReView Activate Instant ReviewNext Function Memory Soundtrack SelectionTimeScan Variable-Speed SearchPause Menu Push JOG TimeScan TimeScan AudioSpeed SP Speed LPBasic Recording Recording Features Engage ITR ModeSelect Channel to Watch SET Recording DurationReset Counter SET Counter DisplayDisplay Remaining Time Elapsed Recording Time IndicationReceiving Stereo Bilingual Programmes To Record Stereo And Bilingual Programmes A2To Record Nicam Stereo And Bilingual Programmes Type of BroadcastSelect S-VHS Mode Access Main Menu ScreenVHS Super VHS, S-VHS ET and VHSSelect S-VHS ET SET ModeSuper VHS ET S.T. Picture System PreparationJogþ Recording PlaybackOr press Record on the recorder During B.E.S.TSystem Setup Access G-CODE Showview Setup ScreenNumber Guide Program Number SetEnter Receiving Channel Position Number Number keys to input Number of the recordersReceived. Then press OK or CODETimer Programming Access G-CODE Showview ScreenTimer Mode Return to NormalEngage Recorders Express Timer Programming Access ProgrammeEnter Programme Stop Time Enter Programme DateWeekly Timer Or OK. Program Completed appears onScreen for about 5 seconds, then normal screen Disengage Timer Mode Return to Timer ModeCheck, Cancel And Replace Programmes Auto SP→LP Timer Auto TimerAuto SP→LP Timer Remote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY PowerTV Multi-brand Remote Control SET TV Brand CodeOperate TV TV Brand Name CodeSET Mode Preparation For EditingPicture Control Return to Normal ScreenIf the camcorder has no S-VIDEO output connector Recorder If the camcorder has an S-VIDEO output connector RecorderEdit From Camcorder PlayerSynchro Editing SET Recording Decks Input Mode Edit To Or From Another Video RecorderStart Source Player Start Recording DeckSET Input Mode Audio DubbingEngage Audio Dubbing Locate Start PointStart Dubbing END Audio DubbingPlay Stop Pause Reset the Counter Insert EditingLocate END Point Start Editing END Insert EditingAccess R.A. Edit Screen Audio signal Video signalCancel Random Assemble EditingLocate EDIT-IN Point Locate EDIT-OUT PointStart R.A. Edit END R.A. EditAccess Initial SET Access Jlip ID NO. SET ScreenTerminal JLIPJoint Level Interface Protocol Connector Connecting Using a Stereo System Audio Cable not providedSetting Of The Colour System Select Buttons Mode DisplayMode Description Off-Air RecordingTape-To-Tape Editing Playback equipmentDubbed tape Auto Channel Set Tuner SET, then pressOK or Push Jogþ Auto CH SET, thenAccess Tuner SET Access Channel ListSelect Position SET Desired StationDelete a Channel Swap Channel PositionsJOG% Fine-Tuning Channels Push JOG ÞIf youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassetteTimer record information has been Timer againRoubleshooting New one. pgQuest Ions and Answers Index Display Panel EN Index Supplied fresh battery actual Maximum recording timeHR-S7600AM