JVC HR-S7600AM specifications Maximum recording time, Supplied fresh battery actual

Page 63

SPECIFICATIONSEN63

GENERAL

Power requirement
Rating	: AC 110 – 240 V`, 50/60 Hz
Operating	: AC 90 – 260 V`, 50/60 Hz
Power consumption	: 24 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)	: 437 x 97 x 347 mm
Weight	: 4.8 kg
Format	: S-VHS/VHS standard
Maximum recording time
(SP)	: 240 min. with E-240 video
	cassette (PAL/MESECAM)
	: 160 min. with T-160 video
	cassette (NTSC)
(LP)	: 480 min. with E-240 video
	cassette (PAL/MESECAM)
(EP)	: 480 min. with T-160 video
	cassette (NTSC)
VIDEO/AUDIO
Signal system	: PAL-type colour signal and
	CCIR monochrome signal,
	625 lines/50 fields
	: NTSC colour and EIA
	monochrome signals,
	525 lines/60 fields
Recording system	: DA-4 (Double Azimuth)
	head helical scan system
Signal-to-noise ratio	: 45 dB
Horizontal resolution	: 400 lines (S-VHS)
	250 lines (VHS PAL/
	MESECAM)
	220 lines (VHS NTSC)
Frequency range	: 70 Hz to 10,000 Hz
	(Normal audio)
	20 Hz to 20,000 Hz
	(Hi-Fi audio)
Input/Output	: RCA connectors
	(IN x 2, OUT x 1)
	S-Video connectors
	(IN x 2, OUT x 1)

TUNER/TIMER

TV channel storage
capacity	: 99 positions (+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF (Low) 42 – 175 MHz
	(High)175 – 470 MHz
	UHF 470 – 870 MHz
Aerial output	: UHF channels (Adjustable
	E28 – E60)
Memory backup time	: Approx. 6 months
	Estimated figure based on
	supplied fresh battery; actual
	performance may differ.
ACCESSORIES
Provided accessories	: RF cable,
	S-Video cable,
	Infrared remote control unit,
	"R6/UM-3" battery x 2,
	Lithium battery CR2025,
	Conversion plug*

*Not provided in certain areas.

Specifications shown are for SP mode unless otherwise specified.

Design and specifications subject to change without notice.

Image 63

Contents HR-S7600AM Safety Precautions Moisture Condensation Mains Check ContentsBasic Connections Situate RecorderVideo Connection Connect Recorder to TVConnect Recorder to Mains With RF Connection Access Video Channel SET ModeVideo Channel Set Select TV SystemSET SET Video ChannelFinish Video Channel SET Finish Video ChannelSET Year Auto Set UpSelect Language SET DatePress OK or Push JOG Þ During Auto Set UpStart Auto Channel SET Major Countries TV SystemOn-Screen Displays Select Language Access Initial SET ScreenStart Clock Operation Access Clock SET ScreenClock Set SET TimeStart Playback Basic PlaybackLoad a Cassette PointSlow Motion Playback FeaturesPlayback Still Picture/Frame-By-Frame PlaybackSections Adjust Tracking ManuallyActivate HIGH-SPEED Search Skip Over UnwantedDigital TBC/NR Access Main MenuActivate Digital TBC/NR Digital 3RSoundtrack Selection Tape Position Indicator Instant ReViewActivate Instant Review Next Function MemoryTimeScan Variable-Speed SearchPause Menu Push JOG Speed LP TimeScanTimeScan Audio Speed SPBasic Recording SET Recording Duration Recording FeaturesEngage ITR Mode Select Channel to WatchElapsed Recording Time Indication Reset CounterSET Counter Display Display Remaining TimeType of Broadcast Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 To Record Nicam Stereo And Bilingual ProgrammesET and VHS Select S-VHS ModeAccess Main Menu Screen VHS Super VHS, S-VHSSelect S-VHS ET SET ModeSuper VHS ET S.T. Picture System PreparationJogþ During B.E.S.T RecordingPlayback Or press Record on the recorderGuide Program Number Set System SetupAccess G-CODE Showview Setup Screen NumberEnter Receiving Channel Position Number Number keys to input Number of the recordersReceived. Then press OK or Access G-CODE Showview Screen CODETimer ProgrammingTimer Mode Return to NormalEngage Recorders Enter Programme Date Express Timer ProgrammingAccess Programme Enter Programme Stop TimeWeekly Timer Or OK. Program Completed appears onScreen for about 5 seconds, then normal screen Disengage Timer Mode Return to Timer ModeCheck, Cancel And Replace Programmes Auto SP→LP Timer Auto TimerAuto SP→LP Timer RE-SUPPLY Power Remote Control FunctionsRemove Power Supply SET Remote Control CodeTV Brand Name Code TV Multi-brand Remote ControlSET TV Brand Code Operate TVReturn to Normal Screen SET ModePreparation For Editing Picture ControlPlayer If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder Edit From CamcorderSynchro Editing Start Recording Deck SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Source PlayerLocate Start Point SET Input ModeAudio Dubbing Engage Audio DubbingStart Dubbing END Audio DubbingPlay Stop Pause Reset the Counter Insert EditingLocate END Point END Insert Editing Start EditingRandom Assemble Editing Access R.A. Edit ScreenAudio signal Video signal CancelEND R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point Start R.A. EditAccess Initial SET Access Jlip ID NO. SET ScreenTerminal JLIPJoint Level Interface Protocol Connector Audio Cable not provided Connecting Using a Stereo SystemOff-Air Recording Setting Of The Colour System Select ButtonsMode Display Mode DescriptionTape-To-Tape Editing Playback equipmentDubbed tape Auto CH SET, then Auto Channel SetTuner SET, then press OK or Push JogþSET Desired Station Access Tuner SETAccess Channel List Select PositionDelete a Channel Swap Channel PositionsJOG% Push JOG Þ Fine-Tuning ChannelsPress Play to turn the indicator off Check the cassette If youre using the RF OUT connec- tionTimer again Timer record information has beenNew one. pg RoubleshootingQuest Ions and Answers Index Display Panel EN Index Maximum recording time Supplied fresh battery actualHR-S7600AM