JVC HR-S7600AM Setting Of The Colour System Select Buttons, Off-Air Recording, Mode Display

Page 50

50EN

INFORMATIONONMULTI-SYSTEMCOMPATIBILITY

Setting Of The Colour System Select Buttons

COLOUR SYSTEM

Mode Display

AUTO

NTSC 3.58

NTSC 4.43

NTSCPAL*

PAL

MESECAM

Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The On-Screen display will show which mode is selected.

Mode

Description

 

 

AUTO

Usually set to this mode. This mode

 

automatically detects PAL, NTSC, SECAM

 

or MESECAM and adjusts to the colour

 

system being recorded or played back.

 

When it does not perform properly, set the

 

colour system manually.

 

 

MANUAL

For recording, there is a choice of 4

 

selectable modes; PAL/MESECAM/NTSC

 

3.58/NTSC4.43. Select the mode that

 

matches the colour signal being received.

 

For playback, there is an additional mode

 

which allows NTSC tapes to be played

 

back and viewed on PAL TVs.

 

 

*"NTSC[PAL" appears during playback only.

NOTES:

In the AUTO mode, NTSC signals will be automatically recorded as NTSC 3.58.

In the AUTO mode, NTSC tapes will be played back as NTSC 3.58.

SECAM signals will always be recorded as MESECAM. Select the AUTO or the MESECAM mode when recording SECAM signals.

When playing back a SECAM tape, select the AUTO or MESECAM mode. The playback picture will always be monochrome.

In the NTSC4.43 mode, with some TVs, on-screen displays (Programme screen etc.) may roll up or down and there may be a loss of colour. When this happens, select the AUTO mode.

Off-Air Recording

The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K and NTSC broadcasts.

TV system

PAL B/G, I, D/K

SECAM B/G,

D/K (OIRT)

NTSC (M)

NOTE:

HR-S7600AM

Recorded tape

 

PAL

 

Recording circuit

 

PAL

Multi-system

MESECAM

 

tuner

MESECAM

(B/G, I, D/K, M)

 

 

NTSC

 

NTSC 3.58

This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).

Image 50
Contents HR-S7600AM Safety Precautions Moisture Condensation Situate Recorder Check ContentsBasic Connections MainsConnect Recorder to Mains Video ConnectionConnect Recorder to TV Select TV System Access Video Channel SET ModeVideo Channel Set With RF ConnectionFinish Video Channel SET Video ChannelFinish Video Channel SET SETSET Date Auto Set UpSelect Language SET YearMajor Countries TV System During Auto Set UpStart Auto Channel SET Press OK or Push JOG ÞOn-Screen Displays Access Initial SET Screen Select LanguageSET Time Access Clock SET ScreenClock Set Start Clock OperationPoint Basic PlaybackLoad a Cassette Start PlaybackStill Picture/Frame-By-Frame Playback Playback FeaturesPlayback Slow MotionSkip Over Unwanted Adjust Tracking ManuallyActivate HIGH-SPEED Search SectionsDigital 3R Access Main MenuActivate Digital TBC/NR Digital TBC/NRNext Function Memory Tape Position Indicator Instant ReViewActivate Instant Review Soundtrack SelectionPause Menu Push JOG TimeScanVariable-Speed Search Speed SP TimeScanTimeScan Audio Speed LPBasic Recording Select Channel to Watch Recording FeaturesEngage ITR Mode SET Recording DurationDisplay Remaining Time Reset CounterSET Counter Display Elapsed Recording Time IndicationTo Record Nicam Stereo And Bilingual Programmes Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 Type of BroadcastVHS Super VHS, S-VHS Select S-VHS ModeAccess Main Menu Screen ET and VHSSuper VHS ET Select S-VHS ET SETMode Jogþ S.T. Picture SystemPreparation Or press Record on the recorder RecordingPlayback During B.E.S.TNumber System SetupAccess G-CODE Showview Setup Screen Guide Program Number SetReceived. Then press OK or Enter Receiving Channel Position NumberNumber keys to input Number of the recorders CODETimer Programming Access G-CODE Showview ScreenEngage Recorders Timer ModeReturn to Normal Enter Programme Stop Time Express Timer ProgrammingAccess Programme Enter Programme DateScreen for about 5 seconds, then normal screen Weekly TimerOr OK. Program Completed appears on Check, Cancel And Replace Programmes Disengage Timer ModeReturn to Timer Mode Auto SP→LP Timer Auto SP→LP TimerAuto Timer SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerOperate TV TV Multi-brand Remote ControlSET TV Brand Code TV Brand Name CodePicture Control SET ModePreparation For Editing Return to Normal ScreenEdit From Camcorder If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder PlayerSynchro Editing Start Source Player SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Recording DeckEngage Audio Dubbing SET Input ModeAudio Dubbing Locate Start PointPlay Stop Pause Start DubbingEND Audio Dubbing Locate END Point Reset the CounterInsert Editing Start Editing END Insert EditingCancel Access R.A. Edit ScreenAudio signal Video signal Random Assemble EditingStart R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point END R.A. EditTerminal JLIPJoint Level Interface Protocol Connector Access Initial SETAccess Jlip ID NO. SET Screen Connecting Using a Stereo System Audio Cable not providedMode Description Setting Of The Colour System Select ButtonsMode Display Off-Air RecordingDubbed tape Tape-To-Tape EditingPlayback equipment OK or Push Jogþ Auto Channel SetTuner SET, then press Auto CH SET, thenSelect Position Access Tuner SETAccess Channel List SET Desired StationJOG% Delete a ChannelSwap Channel Positions Fine-Tuning Channels Push JOG ÞIf youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassetteTimer record information has been Timer againRoubleshooting New one. pgQuest Ions and Answers Index Display Panel EN Index Supplied fresh battery actual Maximum recording timeHR-S7600AM