JVC HR-S7600AM specifications Roubleshooting, New one. pg

Page 58

58EN

TROUBLESHOOTING(cont.)

	OTHER PROBLEMS

		SYMPTOM		POSSIBLE CAUSE		CORRECTIVE ACTION
	1.	Whistling or howling is heard from		● The camcorder's microphone is too		Position the camcorder so its
		the TV during camcorder record-		close to the TV.		microphone is away from the TV.
		ing.		● The TV's volume is too high.		Turn the TV's volume down.

	2.	When scanning channels, some of		● Those channels have been desig-		If you need the skipped channels,
		them are skipped over.		nated to be skipped.		restore them. (☞ pg. 53)

	3.	The channel cannot be changed.		● Recording is in progress.		Press PAUSE to pause the recording,
						change channels, then press PLAY to
						resume recording.

	4.	Channel settings that were made		● After the manual settings were		Perform manual setting again.
		manually seem to have changed or		made, Auto Channel Set was
		disappeared.		performed.

	5.	No channels are stored in the		● The TV aerial cable was not		Connect the TV aerial cable to the
		recorder's memory.		connected to the recorder when		recorder properly and turn off the
				Auto Set Up was performed.		recorder power once, then turn the
						recorder power back on again. The
						recorder will try Auto Set Up again.
						(☞ pg. 8)

	6.	"– –:– –" is displayed on the front		● The lithium battery is exhausted.		Replace the lithium battery with a
		display panel after a power outage.				new one. (☞ pg. 7)

Image 58

Contents HR-S7600AM Safety Precautions Moisture Condensation Situate Recorder Check ContentsBasic Connections MainsConnect Recorder to TV Video ConnectionConnect Recorder to Mains Select TV System Access Video Channel SET ModeVideo Channel Set With RF ConnectionFinish Video Channel SET Video ChannelFinish Video Channel SET SETSET Date Auto Set UpSelect Language SET YearMajor Countries TV System During Auto Set UpStart Auto Channel SET Press OK or Push JOG ÞOn-Screen Displays Access Initial SET Screen Select LanguageSET Time Access Clock SET ScreenClock Set Start Clock OperationPoint Basic PlaybackLoad a Cassette Start PlaybackStill Picture/Frame-By-Frame Playback Playback FeaturesPlayback Slow MotionSkip Over Unwanted Adjust Tracking ManuallyActivate HIGH-SPEED Search SectionsDigital 3R Access Main MenuActivate Digital TBC/NR Digital TBC/NRNext Function Memory Tape Position Indicator Instant ReViewActivate Instant Review Soundtrack SelectionVariable-Speed Search TimeScanPause Menu Push JOG Speed SP TimeScanTimeScan Audio Speed LPBasic Recording Select Channel to Watch Recording FeaturesEngage ITR Mode SET Recording DurationDisplay Remaining Time Reset CounterSET Counter Display Elapsed Recording Time IndicationTo Record Nicam Stereo And Bilingual Programmes Receiving Stereo Bilingual ProgrammesTo Record Stereo And Bilingual Programmes A2 Type of BroadcastVHS Super VHS, S-VHS Select S-VHS ModeAccess Main Menu Screen ET and VHSMode Select S-VHS ET SETSuper VHS ET Preparation S.T. Picture SystemJogþ Or press Record on the recorder RecordingPlayback During B.E.S.TNumber System SetupAccess G-CODE Showview Setup Screen Guide Program Number SetNumber keys to input Number of the recorders Enter Receiving Channel Position NumberReceived. Then press OK or CODETimer Programming Access G-CODE Showview ScreenReturn to Normal Timer ModeEngage Recorders Enter Programme Stop Time Express Timer ProgrammingAccess Programme Enter Programme DateOr OK. Program Completed appears on Weekly TimerScreen for about 5 seconds, then normal screen Return to Timer Mode Disengage Timer ModeCheck, Cancel And Replace Programmes Auto Timer Auto SP→LP TimerAuto SP→LP Timer SET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerOperate TV TV Multi-brand Remote ControlSET TV Brand Code TV Brand Name CodePicture Control SET ModePreparation For Editing Return to Normal ScreenEdit From Camcorder If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder PlayerSynchro Editing Start Source Player SET Recording Decks Input ModeEdit To Or From Another Video Recorder Start Recording DeckEngage Audio Dubbing SET Input ModeAudio Dubbing Locate Start PointEND Audio Dubbing Start DubbingPlay Stop Pause Insert Editing Reset the CounterLocate END Point Start Editing END Insert EditingCancel Access R.A. Edit ScreenAudio signal Video signal Random Assemble EditingStart R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point END R.A. EditAccess Jlip ID NO. SET Screen Access Initial SETTerminal JLIPJoint Level Interface Protocol Connector Connecting Using a Stereo System Audio Cable not providedMode Description Setting Of The Colour System Select ButtonsMode Display Off-Air RecordingPlayback equipment Tape-To-Tape EditingDubbed tape OK or Push Jogþ Auto Channel SetTuner SET, then press Auto CH SET, thenSelect Position Access Tuner SETAccess Channel List SET Desired StationSwap Channel Positions Delete a ChannelJOG% Fine-Tuning Channels Push JOG ÞIf youre using the RF OUT connec- tion Press Play to turn the indicator off Check the cassetteTimer record information has been Timer againRoubleshooting New one. pgQuest Ions and Answers Index Display Panel EN Index Supplied fresh battery actual Maximum recording timeHR-S7600AM