JVC HR-S7850EU, HR-S7851EU specifications Basic Playback, 20 EN

Page 20

20 EN

PLAYBACK

Basic Playback

Turn on the TV and select the video channel (or AV mode).

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.

●Do not apply too much pressure when inserting.

●If the record safety tab has been removed, playback begins automatically.

●If the record safety tab is intact, the recorder checks the tape

information for Programme Navigation. For details, refer to “Navigation” ( pg. 38).

B Find the programme start point.

If the tape is advanced past the start point, press 3 or turn the JOG dial to the left. To go forward, press 5 or turn the JOG dial to the right.

C Start playback.

Press 4. “BEST” appears blinking in the recorder’s front display panel during automatic tracking. ( pg. 29)

D Stop playback.

Press 8 on the remote control or 0 on the recorder’s front panel. Then press 0 to remove the cassette.

Clean the video heads using a dry cleaning cassette — TCL-2UX — when:

●Rough, poor picture appears while a tape is played back.

●The picture is unclear or no picture appears.

●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON” ( pg. 55)).

Usable cassettes

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder can record on regular VHS and Super VHS cassettes. While only VHS signals can be recorded on regular VHS cassettes*, both VHS and Super VHS signals can be recorded and played back using Super VHS

cassettes.

*By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

Image 20

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewRear View Front Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVsCheck the contents 10 ENSituate the recorder Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionAuto Set Up 12 ENTurn on the recorder Select your countryPerform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 14 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 16 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 20 ENSlow Motion High-Speed Turbo SearchPause during playback Activate frame-by-frame playback22 EN Variable Speed SearchIndex Search Skip SearchNext Function Memory Repeat PlaybackManual Tracking Soundtrack Selection24 EN Instant Timer Recording ITR Tape Remaining TimeEngage the Record-Pause mode 26 ENRetake Locate the start pointEngage the S-VHS ET mode Receiving Stereo and Bilingual Programmes ReceivedPlayback RecordingAccess the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 30 ENSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode Enter the programme titleExpress Timer Programming 32 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+Enter the programme mode Before performing the 24 Hour Express Timer Programming34 EN Set the programme start/stop time and channelCancel or change a programme Disengage the timer modeReturn to the timer mode Access the Programme Check screen/displayCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording Before performing the following stepsNavigation 38 ENNavigation Playback Programme Navigation ScreenLoad a recorded cassette Select a programmeSelect the programme 40 ENEdit Programme Title Entering Character Delete Tape DataDelete the tape data Example Enter JVC NewsEdit From a Camcorder 42 ENSet the input mode of recording deck Another Video RecorderAdvantages of S-VHS video recorders Start the source playerAccess the Output/Input Set screen 44 ENSelect and L-2 Input Setting Decoder connectorAudio Dubbing 46 ENEngage the Audio Dubbing mode Start dubbingEnd Audio Dubbing Press AUX number key 0 and/or PR to select F-1 or S-1Insert Editing 48 ENEngage the Insert Editing mode AV Insert EditingLocate the end point Start EditingConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Select the input mode 52 ENConnect the decoder Set the tunerConnecting/Using a Stereo System Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingWhen viewing overplayed When this function is set to ON, the timer is automaticallyDisengaged when the recorder is powered back on System to on or OFF pgOn the remote control, or press 7 on the recorder Entire programme while timer-recording in SP mode56 EN Function pg , set PROG. Navigation to OFFWhen this function is set to ON, you can reduce Power consumption while the recorder is turned offWhen this function is set to ON, you can automatically Correct vertical vibration in the picture when playing back58 EN About Ntsc PlaybackShowview System Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberAccess the Auto Channel Set screen Tuner Set60 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 62 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 64 ENSet Stations a TV Station And ID List Station Name66 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 68 ENPower 70 EN RecordingOther Problems 72 EN PlaybackSignal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS74 EN Memo International telephone Language code Country code