JVC HR-S7851EU Navigation Playback, Programme Navigation Screen, Load a recorded cassette

Page 39

EN 39

Navigation Playback

This function is useful when you wish to quickly find out what programmes you have recorded on a tape with this recorder. This function allows you to select a programme to watch, and then automatically searches for the start of the programme.

A Load a recorded cassette.

Insert a cassette recorded on this recorder.

B Access the Main Menu screen.

Press MENU.

C Access the Programme Navigation screen.

Press rt to move the highlight bar (pointer) to

“PROGRAMME NAVIGATION”, then press OK or e.

● If “NO TAPE DATA DETECTED” appears on the TV screen, you cannot use the Navigation Playback function.

D Select a programme.

Press rt to move the highlight bar (pointer) to the programme you want to watch.

E Start playback.

Press OK. “SEARCHING” appears on the TV screen. Playback begins automatically after the selected programme is located.

Programme Navigation Screen

A Recording date

B Recording start time*

C Station name*

*After entering the programme title ( pg. 40), programme title appears instead of the recording start time and station name.

D Currently selected programme

E Programme title*

*Before entering the programme title ( pg. 40), recording start time and station name appear instead of the programme title.

NOTES:

●If you do not want to use Programme Navigation function, set “PROG. NAVIGATION” to “OFF” ( pg. 56).

●You cannot edit programme title or delete tape data for the cassette with the record safety tab removed.

●Programme Navigation is possible with the cassettes recorded with this recorder only.

●Before recording, make sure the recorder’s clock is set correctly.

●To record the programme information in this recorder’s memory, you must continue to record each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

●Programme Navigation may not work properly depending on the tape being used.

●The programme information is stored in this recorder’s memory. If the memory in this recorder should ever be damaged and the programme information lost, it is impossible to restore that information.

Image 39

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Front Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To UseConnect the recorder to TV Check the contents10 EN Situate the recorderVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsSelect your country Auto Set Up12 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download14 EN Set the video channelJust Clock Language for the on-screen display16 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller18 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 20 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 22 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking24 EN Tape Remaining Time Instant Timer Recording ITRLocate the start point Engage the Record-Pause mode26 EN RetakeEngage the S-VHS ET mode Received Receiving Stereo and Bilingual ProgrammesRecording Playback30 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingEnter the programme title Set the VPS/PDC modeAccess the Title Edit screen Engage the recorder’s timer mode32 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionSet the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming 34 ENAccess the Programme Check screen/display Cancel or change a programmeDisengage the timer mode Return to the timer modeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyBefore performing the following steps Select the L-2 Select modeRecording mode Programme Recording38 EN NavigationSelect a programme Navigation PlaybackProgramme Navigation Screen Load a recorded cassette40 EN Edit Programme TitleSelect the programme Example Enter JVC News Entering CharacterDelete Tape Data Delete the tape data42 EN Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recorders44 EN Access the Output/Input Set screenDecoder connector Select and L-2 Input Setting46 EN Audio DubbingPress AUX number key 0 and/or PR to select F-1 or S-1 Engage the Audio Dubbing modeStart dubbing End Audio Dubbing48 EN Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing Locate the end pointSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode52 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeSystem to on or OFF pg When viewing overplayedWhen this function is set to ON, the timer is automatically Disengaged when the recorder is powered back onFunction pg , set PROG. Navigation to OFF On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 56 ENCorrect vertical vibration in the picture when playing back When this function is set to ON, you can reducePower consumption while the recorder is turned off When this function is set to ON, you can automaticallyAbout Ntsc Playback 58 ENEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program NumberAuto Channel Set Access the Auto Channel Set screenTuner Set 60 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 62 ENDelete a Channel When Receiving a Scrambled Broadcast64 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Clock Set66 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data68 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetPower Recording 70 ENOther Problems Playback 72 ENLines VHS Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Scan system74 EN Memo Country code International telephone Language code