JVC HR-S7851EU System to on or OFF  pg, Picture System, Minimizes picture, With lots of flat

		EN 55
		* The default setting is bold in the table below.
8 B.E.S.T.		You can set the B.E.S.T. (Biconditional Equalised Signal Tracking)
ON		system to “ON” or “OFF” ( pg. 29).
OFF
8 PICTURE CONTROL		This feature helps you to adjust the playback picture quality
AUTO:	Provides the optimised	according to your preference. Normally select “AUTO”.
	picture benefits of the B.E.S.T.	NOTES:
	Picture System.
EDIT:	Minimizes picture	● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not
	degradation during editing	change until you select another mode.
		● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you
	(recording and playback).
SOFT:		finish dubbing the tapes.
	Reduces image coarseness
		● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically
	when viewing overplayed
		from “AUTO” to “NORM”.
SHARP:	tapes containing a lot of noise.
	Clearer, sharper-edged
	picture when viewing images
	with lots of flat,
	same-coloured surfaces such
	as cartoons.
8 AUTO TIMER		When this function is set to “ON”, the timer is automatically
ON		engaged when the recorder power is turned off, and automatically
OFF		disengaged when the recorder is powered back on.
		NOTE:
		For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions
		are disabled while the Timer mode is engaged. To disengage the timer, press
		# (TIMER).
8 O.S.D.		When this function is set to “ON”, various operational indicators
ON		appear on the TV screen. Messages appear in the selected language
OFF		( pg. 15, 16).
		NOTES:
		● When you use this recorder as the source player for editing, be sure to set
		“O.S.D.” to “OFF” before starting.
		● During playback, the operation mode indicators may be disturbed
		depending on the type of tape being used.