JVC HR-S7850EU, HR-S7851EU specifications Navigation, 38 EN

Page 38

38 EN

PROGRAMME NAVIGATION

Navigation

When you record a TV programme with this recorder, the recorder automatically stores in its memory the recording date, start time and station name. You can store these information for up to 8 programmes on one cassette. At maximum, information for 10 tapes can be stored. You can also enter the programme title when performing “SHOWVIEW® Timer Programming”

( pg. 30) or “Express Timer Programming” ( pg. 32). It is possible to store these information only when “PROG. NAVIGATION” is set to “ON” (default setting) ( pg. 56).

When inserting a cassette with the record safety tab

intact ...

The recorder checks the tape information for the Programme Navigation.

If the recorder can store the information for 3 or less tapes, “REMAIN[ _]” also appears on the TV screen.

If the recorder has already stored the information for 10 tapes, “MEMORY FULL” appears.

If you perform new recording, the oldest tape information will be deleted from the recorder’s memory.

If the recorder cannot detect the tape information, “NO TAPE DATA DETECTED” appears.

You cannot use Programme

Navigation.

NOTE:

If you press any button while “CHECKING TAPE DATA” appears on the TV screen, the operation is canceled.

When inserting a cassette whose record safety tab

has been removed ...

Turn on the TV and select the video channel (or AV mode).

Playback begins automatically.

You can use Navigation Playback ( pg. 39), but you cannot edit programme title or delete tape data ( pg. 40, 41).

Image 38

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewRear View Front Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up12 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download14 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 16 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 20 ENPause during playback Slow MotionHigh-Speed Turbo Search Activate frame-by-frame playbackIndex Search 22 ENVariable Speed Search Skip SearchManual Tracking Next Function MemoryRepeat Playback Soundtrack Selection24 EN Instant Timer Recording ITR Tape Remaining TimeRetake Engage the Record-Pause mode26 EN Locate the start pointEngage the S-VHS ET mode Receiving Stereo and Bilingual Programmes ReceivedPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 30 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 32 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+34 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channel Return to the timer mode Cancel or change a programme Disengage the timer mode Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode Before performing the following stepsNavigation 38 ENLoad a recorded cassette Navigation PlaybackProgramme Navigation Screen Select a programmeSelect the programme 40 ENEdit Programme Title Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsEdit From a Camcorder 42 ENAdvantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerAccess the Output/Input Set screen 44 ENSelect and L-2 Input Setting Decoder connectorAudio Dubbing 46 ENEnd Audio Dubbing Engage the Audio Dubbing modeStart dubbing Press AUX number key 0 and/or PR to select F-1 or S-1Insert Editing 48 ENLocate the end point Engage the Insert Editing modeAV Insert Editing Start EditingConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode52 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingDisengaged when the recorder is powered back on When viewing overplayedWhen this function is set to ON, the timer is automatically System to on or OFF pg56 EN On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode Function pg , set PROG. Navigation to OFFWhen this function is set to ON, you can automatically When this function is set to ON, you can reducePower consumption while the recorder is turned off Correct vertical vibration in the picture when playing back58 EN About Ntsc PlaybackGuide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program number60 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 62 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 64 ENSet Stations a TV Station And ID List Station Name66 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 68 ENPower 70 EN RecordingOther Problems 72 EN PlaybackScan system Signal-to-noise ratio 45 dB Horizontal resolutionMemory backup time Approx min Lines VHS74 EN Memo International telephone Language code Country code