Output/Input Set
L-1 OUTPUT and L-1 INPUT Setting
The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode depending on the type of appliance connected to the recorder’s AV1 (L-1) IN/OUT connector.
A Access the Main Menu screen.
Press MENU.
B Access the Output/Input Set screen.
Press rt to move the highlight bar (pointer) to “OUTPUT/INPUT SET”, then press OK or e.
C Select the output or input mode for the AV1 (L-1) IN/OUT connector.
Press rt to move the highlight bar (pointer) to “L-1 OUTPUT” or “L-1 INPUT”. Then, press OK or e to select the appropriate setting.
*The default setting is bold in the table below.
8L-1 OUTPUT
VIDEO: If a connected appliance’s input is compatible only with regular video signals, set to “VIDEO”.
S-VIDEO:If a connected appliance’s input is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)
8L-1 INPUT
VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.
S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)
D Return to the normal screen.
Press MENU.
NOTES:
●If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set “L-1 INPUT” to “S-VIDEO”.
●If “L-2 SELECT” is set to “DECODER”, it is impossible to set “L-1 INPUT” to “S-VIDEO”.
